Kubi or Rolock dry gloves

[Wibble]

Kubis are only hard to pull apart if you put them on with the oring dry. A tiny bit of silicone grease or even spit prior to donning and they come off very easily (but not unintentionally).

Use a double ender or your belt clip

 

[Wibble]

The Rolock 90 instructions for mounting gloves on the glove ring are that you align an imaginary line that extends through the middle finger of the glove with an alignment dot on the glove ring. I found that aligning the dot with an imaginary line that extends through the space between my thumb and index finger works better for me. Either way, it is fairly simple and easy....once the glove and wrist rings are setup, the fit will be the same each and every time one twists the glove rings on.

At least with Kubi's you don’t need to align them. They just work.

 

[p_kos]

Use a double ender or your belt clip

Use a double ender or your belt clip

Definitely an option if you forgot to lube.

 

[Zef]

At least with Kubi's you don’t need to align them. They just work.

Yup...I guess they are the superior system. I will be forever doomed to mediocrity as I work so danged hard to get my Rolock rings properly aligned.

-Z

 

[Wibble]

Definitely an option if you forgot to lube.

I’ve never bothered.

I do dribble saliva on the O-rings when putting them on as it's easier to press them together.

 

[p_kos]

Yup...I guess they are the superior system. I will be forever doomed to mediocrity as I work so danged hard to get my Rolock rings properly aligned.

-Z

Admission is the first step.

 

[lexvil]

Some people just want to struggle, would love to watch a video on one of those no index glove changes.

 

[p_kos]

Some people just want to struggle, would love to watch a video on one of those no index glove changes.

You mean like changing a torn glove on a Kubi ring? Would be a very short video.

 

[lexvil]

Show me

 

[Wibble]

Show me

It’s literally 60 seconds. Helps if you’ve a plastic card to lever out the O-rings. No alignment required.

Spare G17K gloves and a plastic card kept in the drysuit bag along with a spare wrist seal in case one tears