Search results

Hi Does anyone have the service manual for this reg? Especially for the 2nd stage? AQUALUNG Titan DIN buy and offers on Scubastore Thanks!

Read about the opening of a dive centre in Du'an, Guangxi to support cave divers. Also read some reports of explorations going on there. Does anyone have reliable info of the cave conditions there? Depth, visibility, logistics? From what I've read the caves seem to be deep, 100-200m range...

When carrying 2 bottom stage bottles for a cave dive, do you breathe down: 1. the stage bottle furthest away from you first, or 2. the stage bottle nearest to you? I can think of pros/cons for each. #1: Pros If you breathe down the one closer first, the heavier outer stage will press down on...

I'm cave trained and was wondering what the protocol is for wreck divers. For caves, we are taught a few searches but the go to is the shotgun aka bicycle spoke search pattern. It involves doing a primary tie off with the safety spool then a secondary tie off as a direction reference then...

Hello, would like to hear what is your most efficient method to use when you need to move your can light and primary reel from your left hand to your right, when you need to free up your left hand. I cup the reel with my right palm and slot my thumb into the reel handle, and index finger into...

Hello, How much weight can I typically remove when moving from aluminum 11L doubles to 12.2L steel doubles? I use around 14lbs with the alu doubles in a drysuit with FE Arctic undergarments. Unfortunately where I'm going the logistics won't allow me to do a weight check before the dive. Thanks.

Different manufacturers use different designs of spools and I am looking for an online source that sells most if not all of the commonly used spool designs. Must be able to ship internationally. Where do you usually buy from? Also the o-rings used in these spools look similar but I suspect...

I'm considering getting a Suex Xjoy 7. However, most of my diving is done overseas, and I need to fly to get there. Just wondering if this is a feasible thing to do on a regular basis? The Xjoy7 is 19kg, with a sealed lead acid battery. Most airlines allow you to check in 2 pieces of 25kg...

Am getting a new can light and am considering these 2. Saw the light-for-me in action recently and it's impressive. Very bright, focused beam with a nice bluish hue. However I don't really like the piezo switch. Also I don't know anything about it's comfort or reliability. The Halcyon Flare has...

This is a Seemann sub aka Subgear diaphragm first stage. Anyone knows how to remove the HP seat & spring from the area which is shown in the first pic? Never seen this design before. This is the end that the yoke retainer screws into.

Can anyone confirm which model of Beuchat regs these are? The 2nd stage should be a VRT 30. I think the first stage on the right is a VS3. The other one I am not sure, a VR30 perhaps? Is anyone familiar with these? If you have service manuals for these, would appreciate them, thanks.

On yoke first stages like the DST, the filter element (or guard) is a flat white disc that you push into the yoke retainer. Is there an easy way to remove these on disassembly? The manual says to push them out with a 6mm hex key, but they don't want to come out.

Referring to this tool: Some brands of first stages require this tool for dis/re-assembly. May I know what is the common pin sizes I should get? Thanks.

I was considering a Coltri MCH6 but heard from a friend that support for here is non-existent. Bauers cost too much. Found L&W on the web but have never heard of this brand. Anyone has experience with these compressors, particularly the LW 100 E1 model?

Apeks makes an ATX setting tool for adjusting lever height. Does anyone know the measurements for the height of the tool for pass/fail settings? Thanks PS: This tool is used for setting lever height on the ATX series of Apeks 2nd stages. You push it on the purge button, and if the lever height...

Have a question on the assembly sequence for the Mk10. As this is an old reg, I don't have the manual for it. I'm guessing the correct sequence is to install the red/purple o-ring into the main body cavity, then install the piston with the help of the piston bullet, recheck the seating of the...

I was re-watching the SP S600 technician training video , and noted that the jam nut was inserted with the protruding part facing outward (please see attachment). However, if my memory serves me, I recall during my own training that I was told the protrusion on both the steel washer and jam...

Hi, Need help in recommending a reliable, experienced drysuit repair tech/shop to fix the leak in my drysuit in the Los Angeles area. The local distributor I bought the made-to-measure suit from ordered boots that were too big, then changed them out for the right size but screwed up the job so...

Hi all, Which soaps or cleaning solutions have you found to be most effective in cleaning away teflon based lubes like Christo or Tribolube? General liquid soaps don't seem to work very well.

Hola! I'll be heading to PA in December and need all the advise I can get on lodging, transport & where to eat. I'm traveling on a budget so am not looking for anything luxurious or high-end. Lodging - There will be 3 of us, so prefer something like a condo. A working washing machine is a must...