Question for Scubapro techs - S600 question

[WhiteSands]

I was re-watching the SP S600 technician training video , and noted that the jam nut was inserted with the protruding part facing outward (please see attachment). However, if my memory serves me, I recall during my own training that I was told the protrusion on both the steel washer and jam nuts faces inwards towards the second stage case. Which is correct?

 

[WhiteSands]

Sorry, just to be clear by what I meant by "protrusion", here's the same pic with an arrow pointing to the "protrusion". I recall during my training that it should go in the other way round.

 

[nickbutcher]

Yes, other way round

View attachment S600.pdf

 

[tstormdiver]

I agree, on the older S600 versions, either way. On the newer versions that have the metal collar, the protrusion goes inside the metal collar.

 

[DIY]

Where can I find the "SP S600 technician training video"

 

[WhiteSands]

Where can I find the "SP S600 technician training video"

You have to attend the SP technician training