yoke on hp?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I have been diving my hp tank for 3 years with a 3000 psi rated scubapro reg yoke style,the valve still has the factory o ring in it,the longest one has ever lasted. I had the same concerns as you when I bought the tank but have had no problems,but it is rare to get a complete fill,usually about 3200psi cold.
 
I have close to a thousand dives on sets of HP 120s I bought two years ago with a yoke Aqualung with not a single problem. Not to mention when I dive my dive buddies generally used my sets of tanks as well so that is double the dives with no problems. I wouldnt hesitate a bit to use a yoke if it is rated to hold the pressure.
 
I have close to a thousand dives on sets of HP 120s I bought two years ago with a yoke Aqualung with not a single problem. Not to mention when I dive my dive buddies generally used my sets of tanks as well so that is double the dives with no problems. I wouldnt hesitate a bit to use a yoke if it is rated to hold the pressure.

All I know is that I have blown out many o-rings while filling tanks to high pressure with a yoke-style whip. It is no big deal to blow an o-ring at the fill station. It would be quite different underwater. I will only use DIN connections over 3300 psi.
 
I've used yoke connections on my HP 120's for a long time, never had an o-ring problem during use or during filling. As long as you don't over-tighen the yoke and cause the regulator to 'cut' into the o-ring, there shouldn't be any problem at all. I have since converted over to DIN valves on my tank, only because I got a DIN regulator with a lower profile and, as stated before, the adaptors make the regulator stick out too close to one's head.
 
In that case, there are adaptors DIN->yoke that exist.

They are a pain in the arse....The stick out much further an a std yoke or din valve and hit the back of my head. I just use a din for everyday use and have a duplicate yoke first stage that I use when I travel.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom