wreckdiversam
Registered
Help everyone. I've been reading for a little while and I finally want to get in on the discussions. I've completed my certifications in OW and enriched air. I plan on taking the AOW after logging a few more dives. I see myself as primarily diving wrecks on the east coast. These usually are in 100' of water. I may also do things on the Gulf Coast (like the Flower Garden Bank) but that would not be the main area that I will dive. I want to buy all of my gear during the winter season and here is what i've come up with along with explanation for non-standard stuff.
All ScubaPro stuff:
MK25 1st stage with DIN connector - Going to mostly dive wrecks and shops around here primarily use DIN
A700 2nd Stage
R295 Octo
Pure-Tek Harness with 30lb lift donut wing
Aladin 2G Dive Computer
Analog Pressure Gauge
Anyone see anything wrong with this setup? Any other recommendations? I want to stay at about or less than $2000.
All ScubaPro stuff:
MK25 1st stage with DIN connector - Going to mostly dive wrecks and shops around here primarily use DIN
A700 2nd Stage
R295 Octo
Pure-Tek Harness with 30lb lift donut wing
Aladin 2G Dive Computer
Analog Pressure Gauge
Anyone see anything wrong with this setup? Any other recommendations? I want to stay at about or less than $2000.