Search results

So somehow as you can see in the picture the numbers have all rotated. There is zero pressure in the gauge and the zero should be where the needle is. I tried pressing on the transparent enclosure and rotating it without luck. Am I alright to pry it open? How do I properly seat the plastic cap...

I have a Faber HP100 I bought a couple years ago. I'm into sidemount diving now and looking to buy a matching Faber HP100. If I purchase a newer one will there be any weight or dimensional discrepancies worth worrying about? Are they all identical anyway? Thanks

I need to replace my 6 inch HP hoses but they're $40 a piece? Why are they so pricey? Anywhere I can get them for cheaper? Thanks!

What tire tube size would I need to make my own hose retainer or a cover for my cam bands on an Al80? I'm looking to cut the tire tubes from the center outward rather than around the circumference. Thanks!

I have Bare installed cuffs on my drysuit and currently use the blue Bare gloves that are pushed into the wrist cuffs. These gloves are hard to put on and take off so I'm looking to see if there are any gloves that will pull over and stay on these particular cuffs? Is there a good place to...

I'm looking to purchase a dive boat in Ontario, preferably close to Muskoka. Anyone selling in this area? Thanks!

The size is XL short. The boot size is a 10. It comes with all the bells and whistles. Two thigh pockets, p-valve, wrist cuffs and a neck ring for easily swappable neck seals. I paid $3500 for it last year and I've already outgrown it due to weight gain. It has been recently serviced by Bare...

Top is a large and the bottom is a medium. I've gained some weight and they are simply too small for me so I'm just looking for a size up. I've owned them under a year and they only have a handful of dives on them. They still smell like they're brand new! Always kept clean and looked after...

I've been working out pretty intensely and I've gained quite a bit of muscle. My thighs and fitting into the drysuit are my main concern. I've lost the ability to comfortable put on my fins and at this rate I will soon lose much of my leg mobility in the water. Would it be possible to send the...

Argon is a bit hard to get where I am so I intend to just get an Al40 or similar filled and perhaps a low pressure argon bottle. What sort of mechanism would I need to do this to ensure that I don't overpressurize the argon bottle with a 3000 psi storage tank? Also, I will tank any advice as...

My instructor gave me this bottle for drysuit argon use. I can't seem to find a valve for it and neither can my LDS. Does anyone know more about it? Thanks!

I'm looking for a primary canister and I don't have much experience with them. I'd like to stick with LED technology however. What is the general consensus on the LX25? What other options should I consider? Thanks

What specs should I look for in a deco lift bag? Open bottom? Assuming I don't want/need a valve. Thanks!

I'm slowly getting into tec diving and I'm looking at tec computer options. Is there such a thing as a wrist computer on which I can change the algorithm model and/or integrate it with computer software? Are these worth looking at? Which dive planning software would be best if I am looking to...

Are there any pictures of this setup online somewhere? I have two D-rings on the shoulder but it doesn't really make a difference which one I attach it to. I have one D ring on the waist which I just clip the bottom boltsnap to. I've initially tried diving aluminums without weights and...

I am rigging and mounting my deco bottle as described by people all over the web and it doesn't seem to work for me. The top of the bottle hangs really low. I'm thinking I should move the boltsnap closer to the neck? How does this rigging work for anyone else unless their waist strap is much...

My LDS contacted Professional Scuba Inspectors and they said it was impossible to tell what the stain was but it was fine to put the cylinder into service. How does no one in the scuba industry not know what a blatant brown stain is at the bottom of the tank? Especially when everyone is anal...

I purchased a new Luxfer Al40 and when I went to take it in for a viz they told me it had a brown ring stained around the bottom of the interior. The shop I bought it from said the tank was fine and that the O2 Inhibitor solvent can leave such stains. But my LDS said they have never seen...

It seems very inefficient to me, maybe I just need to practice more. As you can see in the video I don't move very much with each stroke. Tips?

Can someone confirm this? The Padi Tec Deep Diver manual ONLY comes on a CD as a pdf now? I can't even get an actual book? And the disk is $50?