Why not attach spool to DSMB before the dive?

[BlueTrin]

Follow up question: when storing the 2 unattached, I am able to secure the line by passing it through 2 holes on the spool in a similar way to what you have in the picture. It basically avoids the double ender to open unintentionally.

View attachment 741113

How do you secure this when storing attached?

Feedback Wanted: Apeks Spool & Halycon Big DSMB

Hi Game Changer. Why do you need the double ender? Can you just use the snap on the SMB strap to hold the line on the reel, and use the SMB bungie to hold the strap so that the reel is right on the SMB for storage? I need the double-ender for Step 5: "When DSMB is fully launched, retrieve...

scubaboard.com

Basically you just rig it, then pull one time through a hole then roll around the double ender behind the lever and attach, the loop around the lever will pull against it preventing opening.

When I put it in my drysuit pockets I find that if you just clip normally after pulling hard it’s enough to keep it together.

 

[Wibble]

Follow up question: when storing the 2 unattached, I am able to secure the line by passing it through 2 holes on the spool in a similar way to what you have in the picture. It basically avoids the double ender to open unintentionally.

View attachment 741113

How do you secure this when storing attached?

Full details on the spool knitting:

DIR- GUE - Spool to SMB attachment

Surprising to some, but GUE's "principles" do leave some things open to flexibility. Some divers prefer to keep the spool and SMB pre-attached. Other divers prefer to leave them separated for various reasons. One reason I think I recall an instructor mentioning was flexibility; maybe when...

scubaboard.com

Link to post 81 in this thread:

Why not attach spool to DSMB before the dive?

Always carry two SMBs (dive in tidal waters). Use proper "man-sized" Halcyon SMBs which are inflated using the suit inflate hose. Used to use spools which were connected prior to the dive. Kept one SMB in each pocket. Since moving to CCR I've realised that this is too fiddly as there's way...

scubaboard.com

 

[LFMarm]

View attachment 741302

Full details on the spool knitting:

DIR- GUE - Spool to SMB attachment

Surprising to some, but GUE's "principles" do leave some things open to flexibility. Some divers prefer to keep the spool and SMB pre-attached. Other divers prefer to leave them separated for various reasons. One reason I think I recall an instructor mentioning was flexibility; maybe when...

scubaboard.com

Link to post 81 in this thread:

Why not attach spool to DSMB before the dive?

Always carry two SMBs (dive in tidal waters). Use proper "man-sized" Halcyon SMBs which are inflated using the suit inflate hose. Used to use spools which were connected prior to the dive. Kept one SMB in each pocket. Since moving to CCR I've realised that this is too fiddly as there's way...

scubaboard.com

Great suggestion. Just tried and it works great. To make it even more snug, I am passing the double ender through the 2 bungee loops that keep the DSMB folded. The overall assembly is now very secure and doesn't wiggle. Thanks all for the suggestions. I did think there was still so much to learn on DSMBs!

 

[BlueTrin]

Great suggestion. Just tried and it works great. To make it even more snug, I am passing the double ender through the 2 bungee loops that keep the DSMB folded. The overall assembly is now very secure and doesn't wiggle. Thanks all for the suggestions. I did think there was still so much to learn on DSMBs!

If that helps I carry two DSMB, one wide and one slim. They are both tall but the slim fits in my pocket easily.

 

[Dan G]

I like to rig the DSMB and fingers spool together before the dive. I have been diving with it in a pocket, but I also want the option of clipping it off to my backplate, which is handy if your pocket space is limited. I just did a little bit of searching on youtube and found this video which was one of the better ones I saw in my brief search. It also seems to match the technique used in the GUE thread linked in post #134 which looks straightforward and simple to rig.

 

[Pearlman]

So I will get to practice DSMB deployment on my dive vacation next week and am currently practising and optimising how I stow my DSMB in my living room. Reading this thread helped me decide I need to keep the kit attached on a dive. But the challenge is that I got a DSMB that is more than 1.5 mtr long, to compensate for… (nah skip that!) - out of sheer anxiety of ever being lost at sea.

I have tried deploying the DSMB a few times only with poor results (good thing nobody was filming). But now I know why - I never practiced for muscle memory on land before by breaking down the deployment into a sequence small steps. Now I am at it and I realise I cannot blow my DSMB on land in 1-2-3 or even 4-5 breaths! “It’s so beeeg!”… and it’s a closed DSMB with the valve being the only option of blowing it up (no holding the reg under the bottom opening - there is none). I need this to be quick and efficient. What are my options besides buying a new DSMB? Can I instead make it a habit of deploying at 8-10mtrs? Will a DSMB that needs 5-7 breaths on land get stiff in 1 or 2 breaths at 8 mtr (as compared to deploying at 5 mtr - does it get progressively easier)? I got 25mtr so on the spool and plan to cut it down to 15…

Thanks!

 

[scubadada]

As you know, the gas volume in your DSMB will double between 10 m/33 ft and the surface or triple between 20 m/66 ft and the surface. I usually deploy somewhere around the former depth to take advantage of the gas expansion and to have a reasonable amount of line to manage. It also makes it very easy to make the safety stop or a shallow deco stop

 

[wetb4igetinthewater]

@Pearlman

Mark your DSMB at 1/4 the distance from the top with 100 feet/30 meters, 1/3 from the top with 66 feet/20 meters, 1/2 from the top with 33 feet/10 meters.

Partially inflate, roll up your DSMB from the bottom and see from what depth you'd have to deploy.

 

[inquis]

Yes, deeper is easier. At 10 meters, it will take half the number of breaths that it takes at the surface. It will only be half full when you release, but the expansion will fill it out on the way up. If you cut your spool down to 15 m, you probably shouldn't deploy from deeper than about 10 m to allow for the angle due to current.

If you really want quick, you can use your BC inflator hose on the oral valve. Less than 2 seconds, and it pulls HARD. If you're tangled, you're going for a ride. I wouldn't suggest doing this for the first time in open water.

My advice is to inflate orally, even if it takes a few breaths. 1) Take a huge breath as you vent your BC a bit to stay neutral. 2) Blow into the DSMB. 3) Insert reg [edit: in mouth] and purge [edit: so you can breath]. If you need to add more, repeat from step 1. Take your time to release when you're absolutely ready & clear of the line. 4) Release the buoy and take a breath. Hit the inflator to add air back into your BC.

 

[Diving Dubai]

Follow up question: when storing the 2 unattached, I am able to secure the line by passing it through 2 holes on the spool in a similar way to what you have in the picture. It basically avoids the double ender to open unintentionally.

View attachment 741113

How do you secure this when storing attached?

Have a loop of bungee on the reel. it holds teh line. No need for fancy wrapping on a double ender etc. The double ender, is just use to hold the reel/spool to my kit. My reel/spool would not unwind if the double ender came detached. Even in current