Peeing in a dry suit

[broncobowsher]

Tigon was a nice low profile unit, but always leaked. Got a replacement valve as mine was recalled. That one also leaked. I have since heard that the tigon tends to leak 'in strong flow'. So far the light monkey tinkle is working like a champ.

 

[rob.mwpropane]

Tigon was a nice low profile unit, but always leaked. Got a replacement valve as mine was recalled. That one also leaked. I have since heard that the tigon tends to leak 'in strong flow'. So far the light monkey tinkle is working like a champ.

Leaked as in wasn't installed correctly or?

Thanks for the responses. I have ordered from Seaskin before, I'm fine with the wait for when they reopen. Can't beat their prices. Its LM ~ $85 vs Trigon ~ $115 after VAT removed, converted and $10 for shipping.

 

[Searcaigh]

So far the light monkey tinkle is working like a champ.

ha ha I initially read that as "working like a chimp"

 

[broncobowsher]

Leaked as in wasn't installed correctly or?

Thanks for the responses. I have ordered from Seaskin before, I'm fine with the wait for when they reopen. Can't beat their prices. Its LM ~ $85 vs Trigon ~ $115 after VAT removed, converted and $10 for shipping.

Leaked as in you take a piss and the mushroom valve leaks and your leg gets wet. I think the strong flow is making the mushroom valve lift.

 

[lexvil]

Trigon has proven its self to me, so long as I don’t pressurize it to much while flushing which can mess with the equalizer side of the valve, treatit nice and it will return the favor. If you do over pressurize it and disrupt the valve just pop it open and make sure the mushroom is seated properly.

 

[rob.mwpropane]

Trigon has proven its self to me, so long as I don’t pressurize it to much while flushing which can mess with the equalizer side of the valve, treatit nice and it will return the favor. If you do over pressurize it and disrupt the valve just pop it open and make sure the mushroom is seated properly.

I agree. I've read some horror stories about the earlier version but I guess it's all been worked out. I only have 10 or so days on mine (so close to 20 dives) and it's been great....not a drop.

I do flush it after every dive and haven't gotten into any horrible silty stuff yet. @Deep South Divers says he's had issues but dives a commercial environment....so he's probably consistently dirtier than me

 

[broncobowsher]

I never had an issue with the double mushrooms on the exit. It was only the balancing mushroom that I had issues with.
Until I plugged the holes and went with an inline check valve (like the old Light Monkey, pre-Tinkle). That setup worked just fine for a couple of years. Suit had lamination issues and the replacement got a Tinkle. This year sucks and I only have a couple dives on it.

 

[tracydr]

You guys are so lucky to have external urination anatomy.

 

[formernuke]

I have one. I don't plumb in often but with the right size cath it doesn't bother me. As for removal @Marie13 pointed me to some adhesive removal wipes.

Wipe the base insuring to get a little under the cath, roll it up a little and wipe the new base....repeat till off, no pain. I wash it afterwards.


P.S. make sure you manscape

 

[Marie13]

Smith and Nephew Remove Adhesive Remover Wipes 403100, 50-count https://www.amazon.com/dp/B005CZJCZM/ref=cm_sw_r_cp_api_fab_3nFCFbAWJ22AH

These are the removal wipes you want. Amazon is the cheapest source.