Sportways Regs

[claymore]

My daughter bought a set of regs several years ago that need to be serviced and I'm wondering if they are worth servicing or if there are part available.
the second stage is black with a chrome ring that holds the front plate on and says WATERLUNG 200 SPORTWAYS on the purge button and the OCT appears to be the same second but has an orange face plate that says OCOPUS 911 SPORTSWAYS.

The first stag is About 3 3/4" long 1 1/4" in diameter with the yoke connector coming off at 90 degrees from the main body on the same end as the HP port. The three low pressure ports come out on the opposite end of the HP. All the ports are located at the ends of the long axis of the reg. there are four holes evenly spaced around the circumference of the 1st stage about a inch from the LP ports.

Any information would be appreciated

 

[DA Aquamaster]

In answer to your question - you will get more accurate information in the vintage forum.

Sportways has been gone awhile and I suspect the first stage parts will be very hard to find. Simple downstream design unbalanced econd stages tend to be pretty generic so annual servcie parts are not normally a problem as the seat and o-rings are usually commonly available from other sources.