ScubaKris
Guest
I have a project boat
Currently I run my 16 skiff all over the rivers, springs, bays, passes and even the ocean a couple miles out.
If I am not fishing I am diving
Last, Thursday and Friday on Cassidy, Saturday, Burnt Mill Creek to Tyndall bridge St Andrews, SUnday Choc bay Alqua. Tuesday probably Victor, later in the week boat up and check out Morrison, the weekend probably Cypress.
I have a project boat that will not take much to get in the water. Anyone offering help would be welcome aboard for a gas share when we go diving and fishing offshore, you'll have to carry your own tanks.
It is a 26 ft sea star with a 7' beam, 327 Chevy stern drive.
I need to fire up the , I was told the guy rebuilt the engine befoer he died, and see what we have.
I do need a raw water pump, probably from salvage or another boat, E-bay, etc I have an old achor, chain will need a couple hundred feet of rope. I do have a couple old radios, will need to hit the trailer with a welder to reinforce a couple areas, anyone having a welder, other wise it will go to a welder a couple miles up the road, will replace the cracked tires, used ok, replace wheel bearings while the tires are offious finish work, i.e .dive plateform, install seats, gas tank, go over stern drive, fluids etc.
I need to lok at my compressors, i ahve two , AM 4 types, one on a trailer, I need to get the engine going, low time engine, just have not fired it up in a acouple of years, the other compressor blew a gasket. Any compressor experts out there, we can put on the boat for those long days and overnighters on the water.
Skiff set up with trolling moter and underwater lights for bay spearing, floundreing this coming month
Project boat
Currently I run my 16 skiff all over the rivers, springs, bays, passes and even the ocean a couple miles out.
If I am not fishing I am diving
Last, Thursday and Friday on Cassidy, Saturday, Burnt Mill Creek to Tyndall bridge St Andrews, SUnday Choc bay Alqua. Tuesday probably Victor, later in the week boat up and check out Morrison, the weekend probably Cypress.
I have a project boat that will not take much to get in the water. Anyone offering help would be welcome aboard for a gas share when we go diving and fishing offshore, you'll have to carry your own tanks.
It is a 26 ft sea star with a 7' beam, 327 Chevy stern drive.
I need to fire up the , I was told the guy rebuilt the engine befoer he died, and see what we have.
I do need a raw water pump, probably from salvage or another boat, E-bay, etc I have an old achor, chain will need a couple hundred feet of rope. I do have a couple old radios, will need to hit the trailer with a welder to reinforce a couple areas, anyone having a welder, other wise it will go to a welder a couple miles up the road, will replace the cracked tires, used ok, replace wheel bearings while the tires are offious finish work, i.e .dive plateform, install seats, gas tank, go over stern drive, fluids etc.
I need to lok at my compressors, i ahve two , AM 4 types, one on a trailer, I need to get the engine going, low time engine, just have not fired it up in a acouple of years, the other compressor blew a gasket. Any compressor experts out there, we can put on the boat for those long days and overnighters on the water.
Skiff set up with trolling moter and underwater lights for bay spearing, floundreing this coming month
Project boat