trident00
Contributor
Just purchased what was described as a poseidon 150 compressor. It is a project, but not in that rough of shape. The unit turns freely and the motor runs it fine. I already found the second stage little disk valve was installed incorrectly and bent. I was able to straighten the edge and continue troubleshooting until I can get identification of the unit and parts. I found a first stage disk pitted and was able to flip it for now.
To cut to the chase I need to get the unit identified and be able to get parts. I talked to a Gentleman from Bauer, and they didnt initially see the serial number stamped in the block in their computer. The block is from 1996. I am wondering if there are any poisedon specialists around that could help. I believe it is very similar to a Bauer Capitano.
Thanks for your imput and help!!
Cheers, Walt
To cut to the chase I need to get the unit identified and be able to get parts. I talked to a Gentleman from Bauer, and they didnt initially see the serial number stamped in the block in their computer. The block is from 1996. I am wondering if there are any poisedon specialists around that could help. I believe it is very similar to a Bauer Capitano.
Thanks for your imput and help!!
Cheers, Walt
