My new G250Vs and ramblings

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

FTR never once had to flip the vane on any G250Vs I made and sold. Everyone would free flow, I only used .216 springs.
I don’t know what spring is in mine, but I have few 216, I’ll try one in the non free flowing one this morning.
 
Just tried with a 216 spring no change still no free flow.

Experimented I unscrewed the adjustment knob a bit passed the removed retainer clip and it would free flow.
 
Yes, I too have noticed the variation, of cracking effort, if knob if all the way out or just a fraction in. Seems a fraction in nets best result.
 
Flip the vane around and still no free flow.
 
You guys are barking up the wrong tree. Both Dr. Rob and I have suggested the issue is with the lever as that is what separates the hard and soft seats. If you want to experiment, change one thing at a time in the same regulator under the same conditions.

For the record: I still believe the manuals that state for maximum flow the vane crescent should face the aspirator is incorrect. Look at the wording: "facing forward toward the back of the diaphragm" & "facing forward toward the mouthpiece." What sort of double-speak is that? Someone just made a typo or editing error and (just like in the aircraft manuals I've read over the years) the mistake was copied by the script writer.

Speaking of aircraft, if I were to ask you to design an airfoil with a crescent; would you put the crescent on the leading edge or trailing edge? :)
 
https://www.shearwater.com/products/teric/

Back
Top Bottom