Draeger-rEvo stuff is NOT interchangeable with Cooper stuff.
You know I have absolutely no idea what's happening here, stuartv, welcome back by the way
anyway I noticed you were gone for a couple of weeks or something and I use comfobites like
they say Apeks or aqualung ones and sometimes if I can feel them first the cheap ones too, but
the soft really floppy ones like DGX offered are dangerous, but the rubber Draeger rEvo ones
I feel taste like dirt, you know the mouthpiece is superglued into the gag strap I just wonder if
there's a melting fluid that doesn't eat rubber, Poseidon and Omega II have big mouthpiece holes
and I also have tasty silicone mouthpieces big holes similar profile to the Draeger but no brands
Ah ha!!!
Regulator Mouthpiece Orifice Sizes
Generally there are four common 2nd stage regulator mouthpiece sizes:
Standard size orifice regulator mouthpiece
- size 1-1/8 inch x 1/2 inch (28.6 mm x 12.7 mm)
Fits: Apollo; Aqua Lung
older metal regulators, Conshelf 7 through 21 – snug; Atomic
manufactured pre 2005 only and newer T3; Beuchat
Evolution, Iceberg and Nitrox, VXT8, VXT Octo, VX4, VX8; Cressi-Sub
Ellipse is a 2, XS Compact is snug; Dacor
after 1992; IST
except Proline is an intermediate; Ocean Master; Pro Sub
Avalon; Scubapro
S600, S360, S560, R095 and all models before the A700; SEAC; Sherwood
most early models – Brut, Shadow, MagnumII, pre 1992 Blizzard + Oasis; Spare Air; Subgear
R series and Cayman; Tabata/Tusa
not TUSA Imprix.
Intermediate size orifice regulator mouthpiece
- size 1-3/16 inch x 5/8 inch (30.2 mm x 15.9 mm)
Fits: Aeris; Aqua Lung
newer, including Titan, Legend, Kronos and Mikron; Atomic
pre 2005 use a Standard, newer, larger orifice an Intermediate, if not sure, measure or try on; Beuchat
VS3, VS4, VS8, VX10; Dacor
Viper + Eagle; Dive Rite
including O2ptima rebreather, but not the Jet Stream 4500; Edge
HOG + EPIC; Forte; Genesis; Halcyon Rebreather + Regulators; Hollis
except 500SE is a Large; Mares
(not MARES MR-12-II, III, IV or V); Ocean Edge; Ocean Reef; Oceanic
cannot fit Alpha 9 or Omega 3; Odyssey; Scuba Max; Scubapro
models after 2010, including A700, C series, G260, R195 and S620TI; Sea Elite; Sherwood
Maximus, 1992 and newer Blizzard + Oasis, SR1; SPORASUB; SUBGEAR
SG50, SG30, SG10, Aruba and Bonaire, Tigullio, Tilos; XS SCUBA
(previously IDI, Osprey is a standard).
Large size orifice regulator mouthpiece
- size 1-5/16 inch x 11/16 inch (33.3 mm x 17.5 mm)
Fits: Apeks; Dive Perfect; Hollis 500SE; and Zeagle 2nd stage regulators. Plus many rebreathers, including Golem Shrimp BOV; Hollis Prism+Explorer; ISC Megladon; Kiss Gem; Poseidon
(snug fit); and Titan.
a mouthpiece hunting I go, a mouthpiece hunting I go, hi ho the derry-o a mouthpiece hunting I go
Thanks to Lloyd Borrett drunk messager from the
Scuba Doctor Rye Melbourne Australia
ha ha ha ha ha ha ha ha ha ha ha ha ha!!!!
I've been using
this on a DSV this year similar size to Draeger with good happiness
even though I'm a comfobite guy