drysuit cuff repair/replace
- Thread starter njaimo
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
- Messages
- 7,202
- Reaction score
- 6,250
- # of dives
- 2500 - 4999
Yeah that Zef video fixing drysuits guy, is the video guy of the guys
Here I am I am back again, good, you're East are you, East of where
seaskin.co.uk
But of course when you're hesitant or unsure with a creeping anxiety
like some of the suits I have re - repaired where they have splooshed
more glue around than required for 3 jobs and turned their gear into a dogs breakfast
Here I am I am back again, good, you're East are you, East of where
SiTech QCS OVAL Set (Silicon Seal) for DIY fitting - Seaskin Drysuits Shop - Purchase Drysuit Supplies
The QCS Oval cuff ring system has an oval and narrow design and you will not be bothered by the rings during the dive or on land as some poeple find the Purchase SiTech QCS OVAL Set (Silicon Seal) for DIY fitting from Seaskin - drysuit supplies made to order directly from the factory.
seaskin.co.uk
But of course when you're hesitant or unsure with a creeping anxiety
like some of the suits I have re - repaired where they have splooshed
more glue around than required for 3 jobs and turned their gear into a dogs breakfast
Has anybody used a neoprene cuff adapter to fit a ring to a non stretchy trilaminate sleeve that is just a little too small for the ring? I was thinking that a neoprene cuff extension would have enough stretch to fit over the ring itself.
...after fretting the DIY cuff ring replacement, I went ahead and did it. Short answer is the Si-Tech QCS PU Ring fits like a glove in my drysuit sleeves once I removed the ZipSeal. See this thread I just posted. Hope this helps others who are fretting doing the same.
scubaboard.com
DUI ZipSeals to Si-Tech QCS DIY
Thought I share this, as I had been quite worried about replacing my ZipSeals with the Si-Tech QCS PU Ring, to use with Rolock 90 system gloves. A while ago I started this thread drysuit cuff repair/replace but started this new one with a title easier to point to the issue. After over a year...
Similar threads
