- Messages
- 13,874
- Reaction score
- 10,811
- Location
- Port Orchard, Washington State
- # of dives
- 1000 - 2499
Instead of putting your finger through the SPG snap's ring, try just hooking the finger behind the HP hose.
A fairly "normal" set would be...
SPG, 3/4"
primary reg, 1/2"
backup lights and primary light head, 3/8"
stages, 1"
leash if not using a double ender, 3/4"
Some never-use-gloves-divers who use many stages (MX caves for instance) sometimes use a 3/8" on the spg. Some single tank only divers use a bigger snap on the SPG. While not entirely standard, the sizes above should work for most anyone though.
Of course, now rjack goes and tells me I need to buy the in-between sizes again - I'd just settled on just using 1" and 3/8" #00 for everything
Henrik
A fairly "normal" set would be...
SPG, 3/4"
primary reg, 1/2"
backup lights and primary light head, 3/8"
stages, 1"
leash if not using a double ender, 3/4"
Some never-use-gloves-divers who use many stages (MX caves for instance) sometimes use a 3/8" on the spg. Some single tank only divers use a bigger snap on the SPG. While not entirely standard, the sizes above should work for most anyone though.