amadus98
Contributor
the issue i have with gear is no matter how many times i change my weight to the correct setting it always goes bact to weight belt 100lbs - other weight 150lbs... go figure.. but everything else works ok so i can live with it.
OceanLog beta version 2.1.4 Available
- Thread starter Doug Krause
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
jeraldjcook
Contributor
My logbook is the same one I started using the software that came with the computer originally. I'm not sure which version it was. I suppose I could just start a new file starting today and just import whatever is still stored on my dive computer. I'll give it a shot and see how it works.
Which computer are you using?
I started off with the original Atom. The software worked fine until my computer died and I traded it in for an Atom 2.0. I added to my original logbook using the new software.
If you have or had the Atom 1.0 or another older computer, we may be experiencing the same problem.
OK Now that we are on the full release version.
Can the technical people at Oceanic tell me:
Does the Oceanic Pro Plus 2 record the cylinder pressure when it takes data samples?
If Not, how come?
If so, why is the data not downloaded with the rest of the data?
jeraldjcook
Contributor
Oops, looks like I missed this post for a couple of weeks. I'm using a Pro Plus 2. I tried what fq1234 suggested and just started a new logbook using the current software and now the gear section works. But now I'm having the problem amadus98 is having with my weight resetting to 100lbs.
This is all with version 2.1.5, build 9.28.07
When I try to read some new dives from my Atom 2.0 (using Vista Ultimate x64), although it finds the USB interface, when I push the 'play'-button, it immediately stops and says 'Invalid Product - Process Terminated'.
Any suggestions?
Any suggestions?
This message is a copy of Atom 2.0 and Oceanlog problems
Hi I am using your Oceanlog software ver. 2.1.5 build 09.28.07 with an Atom 2.0 firmware rev. 3C and have a few issues:
Under gear when I enter my weight as 4.0kg and navigate across dives, my weights are displayed as anything between 3.1 and 3.9kg, but never 4.0kg as entered.
On my ATOM 2.0 one dive depth displays as 19.0m, but the Oceanlog software displays 18.8 - which is correct?
When entering photos into the Oceanlog software, occassionally the software doesn't save the pictures and I have to start again - very frustrating.
Please add functionality to add multiple photos simultaneously as adding 20-30 photos - one at a time is very frustrating.
Adding photos to dives makes navigating between dives incredibly slow, even when not viewing the photos - only dive details. Please add indexing to your database and don't load the photos until the user actually selects the Photo Album tab.
The reports available in the Oceanlog program are not very useful. Please add one that looks like a PADI log page as that could then be used in a hard-copy log book for those occasions when I'm required to produce my log book or to get signatures of dm's or buddies that I don't normally dive with.
None of the existing reports prints the photographs.
The Oceanlog software changes the default printer set up on my pc.
Why can I not get my start and end pressures from my Atom 2.0 log without downloading the dive data first?
The Oceanlog software needs a print preview function.
How are you calculating the SAC Rate? Whatever formula I use to calculate the SAC Rate differs from your number.
In the Oceanlog Dive Details page, the Elapsed Dive Time column should display seconds as well.
The Elapsed Dive Time graph says a VARI of >9mpm is "Too Fast". The VARI should only be too fast when ascending at >18mpm, not 9mpm.
On the Dive Computer screen, the Transmitter 2-3 ON checkboxes are always checked, regardless of the actual transmitter setting on the Atom 2.0 (try downloading the settings with one set off on the Atom 2.0). When uploading the settings, it always turns both transmitters on.
On the Location screen, temperatures are either all the same, or the first two (Air and Surface) are .0.
On the History screen, there are fields for Best Visibility and Worst Visibility, but there are no fields on the Dive screen to enter visibility.
On the History screen, the Gas Consumed, Best and Worst SAC fields are always blank.
When I use the "Restore Database" menu item, I get a message that the database is in use.
All this after only a week of use.
Hi I am using your Oceanlog software ver. 2.1.5 build 09.28.07 with an Atom 2.0 firmware rev. 3C and have a few issues:
Under gear when I enter my weight as 4.0kg and navigate across dives, my weights are displayed as anything between 3.1 and 3.9kg, but never 4.0kg as entered.
On my ATOM 2.0 one dive depth displays as 19.0m, but the Oceanlog software displays 18.8 - which is correct?
When entering photos into the Oceanlog software, occassionally the software doesn't save the pictures and I have to start again - very frustrating.
Please add functionality to add multiple photos simultaneously as adding 20-30 photos - one at a time is very frustrating.
Adding photos to dives makes navigating between dives incredibly slow, even when not viewing the photos - only dive details. Please add indexing to your database and don't load the photos until the user actually selects the Photo Album tab.
The reports available in the Oceanlog program are not very useful. Please add one that looks like a PADI log page as that could then be used in a hard-copy log book for those occasions when I'm required to produce my log book or to get signatures of dm's or buddies that I don't normally dive with.
None of the existing reports prints the photographs.
The Oceanlog software changes the default printer set up on my pc.
Why can I not get my start and end pressures from my Atom 2.0 log without downloading the dive data first?
The Oceanlog software needs a print preview function.
How are you calculating the SAC Rate? Whatever formula I use to calculate the SAC Rate differs from your number.
In the Oceanlog Dive Details page, the Elapsed Dive Time column should display seconds as well.
The Elapsed Dive Time graph says a VARI of >9mpm is "Too Fast". The VARI should only be too fast when ascending at >18mpm, not 9mpm.
On the Dive Computer screen, the Transmitter 2-3 ON checkboxes are always checked, regardless of the actual transmitter setting on the Atom 2.0 (try downloading the settings with one set off on the Atom 2.0). When uploading the settings, it always turns both transmitters on.
On the Location screen, temperatures are either all the same, or the first two (Air and Surface) are .0.
On the History screen, there are fields for Best Visibility and Worst Visibility, but there are no fields on the Dive screen to enter visibility.
On the History screen, the Gas Consumed, Best and Worst SAC fields are always blank.
When I use the "Restore Database" menu item, I get a message that the database is in use.
All this after only a week of use.
Oceanic released the latest version of Oceanlog today. It addresses some of the outstanding issues. It's available here: Oceanic Worldwide - Owner Services - Software
Similar threads
