where to find split D-rings?

[all4scuba05]

want to remove the plastic D-ring from my BC. Can't seem to find D-rings that are split on the flat side. In other words I plan on breaking off the plastic D-ring and feed the webbing loop through the D-ring opening. I know these rings are out there, just can't find them. Guess its time for the hardware store if you guys haven't seen them online...

 

[Bob3]

I have some that are used on parachute harnesses, not sure how well the cadmium plating would hold up in saltwater though.
They work great in freshwater.
I take it ya can't unthread the webbing?

 

[all4scuba05]

No, that's my predicament. I'm trying to avoid using key rings out of desperation...

 

[PaulChristenson]

http://divingear.com/browseproducts/D-Ring-SST-2x.25.html

http://www.bizrate.com/buy/products__att259--255253-,att259688--264716-,cat_id--12180102.html

 

[codecruncher]

You could buy regular D rings and get out the trusty dremel or small grinder wheel and make your own split.

Even a hack saw and a small flat file might work in a pinch if you're really motivated.
Need a vise of course to work on it.

 

[O2BBubbleFree]

http://divingear.com/browseproducts/D-Ring-SST-2x.25.html

http://www.bizrate.com/buy/products__att259--255253-,att259688--264716-,cat_id--12180102.html

Eh? Can you be more specific, 'cuz those seem to help not at all. I don't find any splits there.

 

[Daxter]

O2, I think Paul is talking about buying a D ring and using a dremel or hacksaw and file to make the split.

 

[all4scuba05]

thanks guys...looks like i'll be going the the local hardware store and most likely cutting then open.

 

[MSilvia]

you might try mcmaster carr at http://www.mcmaster.com

 

[PaulChristenson]

O2, I think Paul is talking about buying a D ring and using a dremel or hacksaw and file to make the split.

Thanks...for the assist...

Here's a good place for a good line...

http://www.brainyquote.com/