Scubapro Inflator Hose Adapter?? Help?

[D_B]

That L.P. one is to convert a standard regulator, to one that can be used with a BC that has an Air2

Mine converts a regulator that has a Air2 fitting on it, to a stamndard size so you can use a BC without an Air2 .. has S-124 on it, that is all that's on mine, got it from my LDS

(I may also get that other one, just to cover all possabilities while on a dive trip)

 

[jim T.]

Thanks DB. I kind of thought that was what was meant but wasn't certain.

Appreciate it.

 

[redacted]

Thanks DB. I kind of thought that was what was meant but wasn't certain.

Appreciate it.

Just back from divng. Water & air both 70. Gotta love TX.

The valve in the std LP inflator hose is just like the one in an auto tire. I believe it is called a schrader valve. It is just not designed to pass a large volume of air and it just gets worse with depth.

 

[tjmills]

So, is there an adapter than can take a standard quick connect to a Scubapro fitting on an Air2? I will also give the boys at Scubatoys a call but I can't find anything at LP.

 

[WarmWaterDiver]

Now I'm REALLY confused - that's what I posted a link to in post #10 on this thread, but D_B indicated that wasn't what you were looking for . . .

 

[tjmills]

Now I'm REALLY confused - that's what I posted a link to in post #10 on this thread, but D_B indicated that wasn't what you were looking for . . .

Sorry, not meaning to confuse everyone. :06:

I have a Scubapro Knighthawk with Air2. I want to use a standard Oceanic regulator on it occasionally. The Regulator usually connects to a Oceanic AirXS (Same as the Air2 but made by Oceanic).

So...what I need is a connector to fit the inflator hose to work with my Air2 when I use it on my Knighthawk. Scubapro is the only manufacturer that uses a special sized connector.

Clear as mud?

I just checked out Post 10. Thats close but I need a Male quick connect (standard) to a quick connect (Scubapro) female.

 

[D_B]

I got ya tjmills, you need something like in post 10, but is an adapter, not a replacement fitting, so you can just "click" it on to change config's

DB

 

[WVDiver]

I got ya tjmills, you need something like in post 10, but is an adapter, not a replacement fitting, so you can just "click" it on to change config's

DB

Yes an adapter that goes from a normal size to the air 2. Do you know of one?

 

[scubatoys]

Yes, we stock those adapters, although they are not on the site... Just call... But also, just swapping the hose would be a very fast option. Almost as fast as popping on the adapter.

 

[tjmills]

Yes, we stock those adapters, although they are not on the site... Just call... But also, just swapping the hose would be a very fast option. Almost as fast as popping on the adapter.

I will be calling. There is a reason I may not be able to switch out the hose as I can't modify the equipment. I agree this is an easy option.

Just to make sure we are talking the same language.... This would be a quick disconnect fitting standard (male) to a quick disconnect female (Scubapro)?