Sci tech compatibility question

[Bowers]

Hi all . My dive team is using the antares dryglove system and has quickly found that we break a lot of tabs. I’m curious if the sci tech systems are modular enough that i could pull out the antares suit side rigid oval ring and replace it with a round rigid ring of another sci tech model. Could this be done without tools and glue? What round systems would fit and which do you recommend? Thanks in advance

 

[Comm]

Had the same problem with my antares - which is why i threw them away. You can fit a number of different solutions in the SiTech PU rings (thats the hard bit that glued into the suit). Check out the various posts on Waterproof Ultima as well as Rolock 90. If you give me a few - there is a super long one that goes through all the various options - and ill re-post it

Because you already have the SiTech rings installed - there is no glue or tools needed.

Edit:

Here is the page I was thinking of. There is a pretty good discussion around page 100 or so about ultima vs rolock

Ultima Dry Glove System question

Do we know when (a date as opposed to a quarter in 2016) the Ultima Dry Glove System will be available and any pricing yet? Thanks.

scubaboard.com

 

[grantmac]

Get Rolock 90 rings and never look back.