Setting up some doubles, I have the isolator open and a reg on each tank. If I only have one tank open (along with the isolator) I was under the assumption the one open tank would provide air to either reg. However, with the isolator open, as soon as I shut down one post, I lose pressure on that reg/spg.
When I had the tanks filled, the isolator was open and both tanks were filled off one post, so at least the isolator worked at that point, but no luck now? Am I confused here or just not doing something right? I'll be taking them into the shop on Monday, but thought some SBers might help in the meantime....
When I had the tanks filled, the isolator was open and both tanks were filled off one post, so at least the isolator worked at that point, but no luck now? Am I confused here or just not doing something right? I'll be taking them into the shop on Monday, but thought some SBers might help in the meantime....