I'm helping a friend start re-building his regulators. It would help to have a table of equivalent o-rings to the proprietary numbers in many of the service manuals. I'll start with some I know and some I would like to know. Contributions from others most welcome.
o-ring equivilents | ||||||
Manufacter | part # | standard size | cs | OD | ID | Notes |
USD | 8200-08 | 006 | 1/16" | 1/4" | 1/8" | |
8280-05 | 006 backup ring | |||||
8200-38 | 011 | 1/16" | 7/16" | 5/16" | ||
957004 | 012 | 1/16" | 1/2" | 3/8" | ||
8244-07 | 013 | 1/16" | 9/16" | 7/16" | ||
957025 | 013 | 1/16" | 9/16" | 7/16" | ||
8200-14 | Probably a 014 | |||||
2844-08 | ||||||
8200-16 | Probably a 016 | |||||
8203-14 | ||||||
8200-10 | Probably a 010 | |||||
ScubaPro | 01-050-127 | 008 | 1/16" | |||
902 | 010 | 1/16" | 3/8" | 1/4" | very close and will work, you will have to push hard to insert it. | |
01-050-132 | 010 | 1/16" | 3/8" | 1/4" | ||
01-050-137 | 010 90D | 1/16" | 3/8" | 1/4" | ||
01-050-138 | 011 | 1/16" | ||||
01-050-144 | 012 | 1/16" | ||||
01-050-147 | 013 | 1/16" | ||||
01-050-152 | 014 | 1/16" | ||||
01-050-157 | 015 | 1/16" | ||||
01-050-179 | 022 | 1/16" | ||||
01-050-179 | 022 | 1/16" | ||||
01-050-184 | 024 | 1/16" | ||||
01-050-322 | 117 |