vioch
Contributor
We don't use balanced p-valves - check valves bring more troubles and no benefits, especially duckbill )))
Peeing in a dry suit
- Thread starter Painter
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
vioch
Contributor
Just tried p-valves with different check valves and all of them sooner or later started to leak. And duckbill valves are the "winners" here.
Struggled with them for about 7 years))
After replacing several duckbill valves I ended up with duckbill valve patched and installing external check valve, then I exchanged external check valve to another type, then removed external check valve at all))
Since then (past 8 years) I'm dry, don't stink and feel no any need in check valve at all ))
P.S. Inspite of ordering non-balanced p-valve, got my new drysuit with LM "Tinkle" from manufacturer this year. Had to refresh my skills and patch duckbill valve again)))
Struggled with them for about 7 years))
After replacing several duckbill valves I ended up with duckbill valve patched and installing external check valve, then I exchanged external check valve to another type, then removed external check valve at all))
Since then (past 8 years) I'm dry, don't stink and feel no any need in check valve at all ))
P.S. Inspite of ordering non-balanced p-valve, got my new drysuit with LM "Tinkle" from manufacturer this year. Had to refresh my skills and patch duckbill valve again)))
OctoHelm
Registered
Hello!
Sorry to bring this back from the dead, but I have a few questions:
I assume I do need to shave down there?
Also, any best way to take it off?
And I just get the tip of the cath to slide over the hose?
Lastly, is there anything that I should know about them before I use a P-valve for the first time?
Thank you all so much!
Respectfully,
OctoHelm
Sorry to bring this back from the dead, but I have a few questions:
I assume I do need to shave down there?
Also, any best way to take it off?
And I just get the tip of the cath to slide over the hose?
Lastly, is there anything that I should know about them before I use a P-valve for the first time?
Thank you all so much!
Respectfully,
OctoHelm
Point by point
Shaving not necessary, close trimming works fine, anything missed willgiveyou insight into waxing.
Removal for some requires a lot of alcohol but I don’t drink so I just grab the bottom edge and roll/peel it off (you’ll build up scar tissue that will make this easier over time
)
You’ll want a quick connect so you can preinstall that end on the cath before installing it to your little friend, if you stand in public trying to attach the tip to the hose someone will call you Rudi the tucker.
After trimming shortining the tip of the cath so that the quick connect barb is scary deep into the cath and staring your little buddy “eye to eye”, this will help keep it from kinking.
Go forth and let it flow.
Shaving not necessary, close trimming works fine, anything missed willgiveyou insight into waxing.
Removal for some requires a lot of alcohol but I don’t drink so I just grab the bottom edge and roll/peel it off (you’ll build up scar tissue that will make this easier over time
)You’ll want a quick connect so you can preinstall that end on the cath before installing it to your little friend, if you stand in public trying to attach the tip to the hose someone will call you Rudi the tucker.
After trimming shortining the tip of the cath so that the quick connect barb is scary deep into the cath and staring your little buddy “eye to eye”, this will help keep it from kinking.
Go forth and let it flow.
- Messages
- 17,332
- Reaction score
- 13,750
- # of dives
- 100 - 199
broncobowsher
Contributor
The beard trimmer works for mowing down the forest. Stubble isn't that bad, it's the long hairs that you miss that will make you pay attention. Don't wait until the day to mow. clean it up a couple days ahead of time. Next day after you have a shower and washed all the trimmings away you can inspect and find the wild hairs you missed.
You don't stretch the cath over the hose. It goes into a barbed fitting. The most basic is a double barb that goes into the hose and the cath. Better is a quick connect. And trim a little off the tip of the cath, minimize the chance of a kink.
For getting it off. Everyone is a bit different but my best method is to pull laterally. It is amazing how much they will stretch. As it stretches the adheasive isn't as strong. Work it off little by little by pushing in as you stretch out and work your way around. If you practice at home, only do it once a day. Natural body oils tend to help in the release. That is if you can wait 4-6 hours after putting it on it will be better than if you take it off 15 minutes after putting it on. I typically pull it off before heading home, unless it was a really short dive or a canceled dive, then the extra hour to get home tends to help.
You don't stretch the cath over the hose. It goes into a barbed fitting. The most basic is a double barb that goes into the hose and the cath. Better is a quick connect. And trim a little off the tip of the cath, minimize the chance of a kink.
For getting it off. Everyone is a bit different but my best method is to pull laterally. It is amazing how much they will stretch. As it stretches the adheasive isn't as strong. Work it off little by little by pushing in as you stretch out and work your way around. If you practice at home, only do it once a day. Natural body oils tend to help in the release. That is if you can wait 4-6 hours after putting it on it will be better than if you take it off 15 minutes after putting it on. I typically pull it off before heading home, unless it was a really short dive or a canceled dive, then the extra hour to get home tends to help.
I really think it's one of those things you have to experience a few times (obviously after reading some) to get the hang of it. The way I put them on and take them off has slightly changed, but that comes with experience.
I can't stress what @lexvil said about trimming the catheter down. I do the same thing, but I've never seen that mentioned on here. My barbs to the quick connect are way shorter than the outlet on the catheter, so I have to trim a good 1/2" or so. The 1st time I did it (and if I've forgotten) it tends to kink more and that's unpleasant and somewhat bad for you as you can get a uti (although I haven't had one yet).
I can't stress what @lexvil said about trimming the catheter down. I do the same thing, but I've never seen that mentioned on here. My barbs to the quick connect are way shorter than the outlet on the catheter, so I have to trim a good 1/2" or so. The 1st time I did it (and if I've forgotten) it tends to kink more and that's unpleasant and somewhat bad for you as you can get a uti (although I haven't had one yet).
broncobowsher
Contributor
Long so it makes gentle radius. Also allows the quick connect in an easy to access location. I run an extension hose so the quick connect above my waist.
Similar threads
