Need Info Dacor ViperTec Din (from yoke)

[carlhwhite]

http://www.scubaboard.com/forums/cl...d-din-conversion-dacor-viper.html#post6928435

I need a Dacor ViperTek Din and need to know if a Dacor 960 or Dacor Extreme would interchange.

I have posted pictures of my regulator in the Classifieds section.

I have already contacted Mares and several others without luck.

Thank you for any help is much appreciated.

Carl White

 

[Fishpie]

The 960 and Extreme almost certainly won't fit.
Depending on the 1st stage that you have a Mares MR12 or MR16/22 will fit.

edit

After seeing your pics it's the Mares MR16 or MR22 that will work (both converters are the same, either will work).

btw if you ever need parts, the Mares equivalent to what you have is:
MV Octo for your 2nd stage.
MR16 your 1st stage

 

[carlhwhite]

Excellent, thank you so very much for the information. Now at least I have something to refer to.

---------- Post added October 26th, 2013 at 02:16 PM ----------

The 960 and Extreme almost certainly won't fit.
Depending on the 1st stage that you have a Mares MR12 or MR16/22 will fit.

edit

After seeing your pics it's the Mares MR16 or MR22 that will work (both converters are the same, either will work).

btw if you ever need parts, the Mares equivalent to what you have is:
MV Octo for your 2nd stage.
MR16 your 1st stage

I want to thank you for this quick information. I was able to call a local dive shop that sells Mares and they had the MR16 in stock which I then had them install it about an hour later.

I am now ready to dive the Rainbow River tomorrow.

Again, thank you!

Carl White