AdivingBel
Diver
I haven't planned a dive in years. Just got back from Little Cayman and last week the diving went like this,
1. The DM draws a map of the dive site on the white board and tells you what to look for.
2. The DM tells you to do a max of 110 ft. for 50 minutes (but you can pretty much do whatever you like)
3. You get your gear on and jump in.
4. Swim in one direction for about 20 to 25 minutes and turn and come back keeping a check on your air.
That's about it. There is nothing there I would call planning.
Most folks, when you talk about planning your dive, think back to when they got certified and you pulled out the tables and started doing some calculations etc. about how long you can stay at some depth and that sort of thing. Maybe now you could do that during a course using a dive computer. I don't know of a person or have ever seen a person on a boat use any sort of table or computer to go over their upcoming dive. I don't think I have even heard anyone discuss with a buddy what their "plan" is. For a lot of what I call typical recreational diving, I see no need to plan a dive.
Hmmm...that sounds very familiar...

Other than the dive briefing, I think I see more discussion (planning) among divers on the boat concerning the length of the SI after the first dive relative to the second dive as opposed to the dive itself. With warm water, trop diving this makes sense to me. I don't get the banging on rec divers over this. If I was diving cold or rough conditions or some other out of the shoebox scenario, I could see it. I get not everybody exclusively does "tidy bowl" diving, but I would think the percentage of those types of dives would be enough to skew the results (especially if you go outside Scubaboard for input).