Hi there,
Without getting into a long story, I had a major computer (laptop) failure and have lost everything including my scuba logbook. I have a backup dump file that shows the raw profile data for each dive and I was wondering if anyone knows what the numbers mean and how I can turn them into a readable graph.
An example dive shows the following profile:
000000000000007920000000012800000000012500000000012800000000010970000000011280000000011580000000009750000000006100000000006710000000011580000000011890000000011580000000012800000000013110000000010060000000010670000000014020000000015240000000015240000000017070000000017070000000017370000000015850000000014940000000015850000000014330000000010670000000010970000000009450000000007010000000006710000000008840000000007620000000008530000000007010000000003350000000007320000000008230000000008230000000009140000000010360000000010970000000009140000000009140000000009750000000009750000000009450000000010360000000010360000000008530000000008840000000008840000000007620000000005490000000005790000000006100000000006100000000006400000000006400000000005180000000003660000000004880000000004880000000003960000000004270000000004570000000005180000000000000000000
It was a 35 minute dive to a max of 57 feet. I'm trying to determine what these numbers mean. At 0:30 into the dive it was approx 18.5 feet. I'm wondering how the first number in this raw info (792) converts to 18.5 ft. Is it PSI, BAR, cm, mm?? Just trying to understand the correlation of each number in the above output to an appropriate depth so I can create a usable graph in a new online log book I'm creating.
Anyone know the answer to this? Any programmers or manufacturers on here that can help me out with the info?
Many thanks
Without getting into a long story, I had a major computer (laptop) failure and have lost everything including my scuba logbook. I have a backup dump file that shows the raw profile data for each dive and I was wondering if anyone knows what the numbers mean and how I can turn them into a readable graph.
An example dive shows the following profile:
000000000000007920000000012800000000012500000000012800000000010970000000011280000000011580000000009750000000006100000000006710000000011580000000011890000000011580000000012800000000013110000000010060000000010670000000014020000000015240000000015240000000017070000000017070000000017370000000015850000000014940000000015850000000014330000000010670000000010970000000009450000000007010000000006710000000008840000000007620000000008530000000007010000000003350000000007320000000008230000000008230000000009140000000010360000000010970000000009140000000009140000000009750000000009750000000009450000000010360000000010360000000008530000000008840000000008840000000007620000000005490000000005790000000006100000000006100000000006400000000006400000000005180000000003660000000004880000000004880000000003960000000004270000000004570000000005180000000000000000000
It was a 35 minute dive to a max of 57 feet. I'm trying to determine what these numbers mean. At 0:30 into the dive it was approx 18.5 feet. I'm wondering how the first number in this raw info (792) converts to 18.5 ft. Is it PSI, BAR, cm, mm?? Just trying to understand the correlation of each number in the above output to an appropriate depth so I can create a usable graph in a new online log book I'm creating.
Anyone know the answer to this? Any programmers or manufacturers on here that can help me out with the info?
Many thanks