Does everyone really need an SPG? (w/transmitter)

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

You might not "blame" it on the tech, but that issue is inherent to the tech. SPGs have their own inherent issues. That's why many divers dive with redundant systems - to reduce the likely hood that the inoperability of one system would cause you to abort your dive, or worse. For all the BS that's been spat of this thread I've not heard one good reason why you absolutely should avoid carrying a redundant air supply measuring device, whether you have an AI or not. Plenty of reasons for carrying it, though......

I don't have a problem with redundancy, just with blaming the technology for operator laziness.

I used transmitters and SPGs for several years before I was confidant enough to ditch the SPGs. Now it's transmitters only even for deep deco and cave dives. All my deco and stage rigs have SPGs however.
 
I work in technology/computers and I’ll probably keep my mechanical SPG because of how many idiots and stupid business practices I see in the industry. I’d be less worried about my computer dying as it giving me wrong numbers. I’m sure facts would prove me wrong though, probably computers are as reliable as mechanical, but diving is a lot about peace of mind and confidence also.

As far as having to end your dive if your computer fails... I agree mostly, but if I’m diving in my home area in a protected bay with max depth of 30’ and planning a 20’ depth for 45 minutes max... I will not dive without my SPG, but would have no issue diving without my computer. If I was diving 100+ depth I’d have two SPGs, digital or analog, probably one of each.
 
I work in technology/computers and I’ll probably keep my mechanical SPG because of how many idiots and stupid business practices I see in the industry. I’d be less worried about my computer dying as it giving me wrong numbers. I’m sure facts would prove me wrong though, probably computers are as reliable as mechanical, but diving is a lot about peace of mind and confidence also.

As far as having to end your dive if your computer fails... I agree mostly, but if I’m diving in my home area in a protected bay with max depth of 30’ and planning a 20’ depth for 45 minutes max... I will not dive without my SPG, but would have no issue diving without my computer. If I was diving 100+ depth I’d have two SPGs, digital or analog, probably one of each.

Unless you drive a really old one, you have a lot of firmware running in your car.

For companies like Shearwater or Divesoft, I believe they have the competence of a high degree of reliability. Transmitters are really low tech and super simple to read. We are talking about pretty low data rates.

In our area, people who technical dive on OC have a single SPG for their back gas, single SPG on each deco bottle. People who technical dive OC on sidemount have just an SPG per cylinder.
 
I work in technology/computers and I’ll probably keep my mechanical SPG because of how many idiots and stupid business practices I see in the industry. I’d be less worried about my computer dying as it giving me wrong numbers. I’m sure facts would prove me wrong though, probably computers are as reliable as mechanical, but diving is a lot about peace of mind and confidence also.

As far as having to end your dive if your computer fails... I agree mostly, but if I’m diving in my home area in a protected bay with max depth of 30’ and planning a 20’ depth for 45 minutes max... I will not dive without my SPG, but would have no issue diving without my computer. If I was diving 100+ depth I’d have two SPGs, digital or analog, probably one of each.

Don't need to end the dive if my Shearwater failed and not exceeding NDL. If I was doing a planned deco dive I could just end dive and do the deco stop. I dive with this SPG....So yes I have Perdix AI and SPG.

CRESSI  CONSOLE.jpg
 
Is that because you own a Shearwater?

I have two Shearwaters, so I could use 4 transmitters. I don't know about the reliability of coming back to a staged transmitter at the end of a dive, and when SHTF, I think it's more important to know what's left in my stage/deco bottles then in my bottom gas. If I was diving back mount where monitoring gas was less frequent and more accessible, I doubt I would use a transmitter.
 
I have a question. Over the years I have had a couple of SPGs fail. Both of them failed by not going all the way back to 0. It's not hard to detect by just paying attention when you take your gauges off, but I wonder if that is a common failure mode.

It is the Bourdon Tube inside the SPG that expands and eventually loses elasticity and does not return to zero, I have seen it many times on older rental equipment which is one of the reasons most busy dive shops change out their equipment on a yearly basis.
 


A ScubaBoard Staff Message...

The OP asked a very reasonable question. Many of the replies are thoughtful, and provide useful information. Not all users agree - which is part of the value of SB discussions. But, let's keep the discussion focused on the question(s), and leave personalities and bickering out of it.
 
OP here

After about a hundred dives without an SPG, my (shearwater) transmitter has worked flawlessly.

I trust modern technology but also realize that things fail.

My theory, a hundred dives ago, remains valid.
I can forego the spg for hundreds of dives and if it (transmitter) malfunctions during a dive, I'll simply abort and reconnect my spg.

The 1 aborted dive is worth foregoing the spg for hundreds of dives.

My personal opinion.

And if the question of aborting a dive caused my partner to prematurely and unnecessarily abort his/her dive.
No, I'll guide my partner to another nearby diver, pair them up and then singly abort my own dive.
Because I always quiz myself when checking my air every fifteen minutes. I've always been +/- 10 bar from what I determined I have versus what the computer said.ill not an air guzzler.
 
Just ran across this image that solves several problems for those divers that want redundancy for their AI.
resized_20200814_184128-jpeg.628954.jpg

It was in this thread: Hose setup..need advice!
You have both an SPG and a transmitter (in case your transmitter dies).
You have a hose so someone doesn't grab your transmitter as a handle (old argument).
You have your transmitter near the front of your bcd (for those that complain about transmitter reception issues).
You don't have much of an additional failure point, since the button SPG is bolted right to the adapter, with no hose.

I may give this a try with a shorter hose that tucks up under my arm out of the way, but accessible if I truly have a failure!

Here's the adapter:
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/p/1743092472
 

Back
Top Bottom