Diving Concepts Dryglove help...

[Jasonmh]

Ok, I just got my new Diving Concepts Drygoves (http://www.divingconcepts.com/link1.htm)
And, being the moron I am, I immediately took the glove side apart to see how it was put together... problem is that now I can't get it back together!!
Anyone changed out their gloves on this system before and have any advise on how the heck to get the glove back on?
Thanks!

BTW- I really like the setup, took quite a bit of effort to get the cuffs installed, but they are nice and work well.

 

[do it easy]

These are tough, but I did mount a pair of gloves just few days ago, using my bare hands and a bare knee. Mo2vation has a nice thead and info about how to cut a piece of pipe to make the installation easier. Of course, I couldn't find that thread, but this one will do nicely.

http://www.scubaboard.com/showthread.php?t=146489

 

[Mo2vation]

You ask - we deliver.

http://scubaboard.com/showthread.php?t=140205&highlight=glove*

I finally got this process wired enough that I don't need the duct tape any longer. Since that thread, I now have the operation to about 4 minutes per glove to replace. Practice and you'll get it! (or rip enough gloves and you'll get it.... )

Ikelite Oring lube really, really helps!

---
Ken

 

[Jasonmh]

These are tough, but I did mount a pair of gloves just few days ago, using my bare hands and a bare knee. Mo2vation has a nice thead and info about how to cut a piece of pipe to make the installation easier. Of course, I couldn't find that thread, but this one will do nicely.

http://www.scubaboard.com/showthread.php?t=146489

Thanks for the link! I was thinking "if only I had like 4 hands I could do it", then I saw in the post about using the A-clamps, sounds great, gonna try it tomorrow.
Thanks,
Jason

And 2 hands and a knee?.. you are the man

 

[Jasonmh]

You ask - we deliver.

http://scubaboard.com/showthread.php?t=140205&highlight=glove*

I finally got this process wired enough that I don't need the duct tape any longer. Since that thread, I now have the operation to about 4 minutes per glove to replace. Practice and you'll get it! (or rip enough gloves and you'll get it.... )

Ikelite Oring lube really, really helps!

---
Ken

Awesome, thanks Ken, I'll try that out too.
Thanks for all the help guys.

EDIT- Good Lord.. Ok, it is late and I am tired
While reading your link I was thinking "I wonder how I never saw this thread before, and you know the more I read it the more sure I am that I have never... seen.. this..before.." And then I see that I have 2 of my own posts in that thread.

 

[amascuba]

Awesome, thanks Ken, I'll try that out too.
Thanks for all the help guys.

EDIT- Good Lord.. Ok, it is late and I am tired
While reading your link I was thinking "I wonder how I never saw this thread before, and you know the more I read it the more sure I am that I have never... seen.. this..before.." And then I see that I have 2 of my own posts in that thread.

Jason, You need some sleep buddy.