OP
phgachoud
Registered
G260 is worse, getting the pin out is more difficult than others even with a tool...
Discuss the use of scubapro screw stopper pin on 2nd stages
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
- Messages
- 17,474
- Reaction score
- 9,704
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
True, but if you use a brass pick or similar and come at it through the face plate you can push it out.
...
More “odd” than the 260 having one but being billed as the “tech” reg is the 420 having one and also the purge button has a stainless cross pin holding it, nothing unscrews until the pin is removed.
- Messages
- 17,474
- Reaction score
- 9,704
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
OP
phgachoud
Registered
My personal favorite picker is that one
- Messages
- 17,474
- Reaction score
- 9,704
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
Looks more suitable for pulling teeth.
This works too but like I said pushing it out is simpler and cheaper:
This works too but like I said pushing it out is simpler and cheaper:
Tool for Scubapro Inflator
This handy tool serves multiple functions on the Scubapro balanced power inflator and second stages as follows: the 12 mm hex assists with the installation or removal of the retainer (inflator hose connection) of the BPI the flat rounded side of the tool is used to remove and install exhaust...
scuba-clinic-tools.com
Similar threads
