• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Busy?

Discussion in 'SeaLife' started by reeldive, Aug 10, 2009.

  1. reeldive

    reeldive Solo Diver

    # of Dives: 500 - 999
    Location: Wausau, FL
    258
    1
    Hey Sea Life Joe. You all must be busy today. I keep getting a busy signal when I call.
    Any way just wanted to check on the status of my DC800 and the Wide angle lens I sent in for service last Monday. RA# 10138.

    Thanks
     
  2. SeaLife Joe

    SeaLife Joe Dive Equipment Manufacturer

    301
    2
    Hello Reeldive,

    We were having our phone system upgraded so that is why you hit the busy mode. I looked into your return and it was recieved in this morning so shouldn't be too long now.
     
  3. reeldive

    reeldive Solo Diver

    # of Dives: 500 - 999
    Location: Wausau, FL
    258
    1
    Received my replacement camera today. Sea Life also replaced my housing at no cost. Great!
    Just one problem. when the camera is in the new housing three of the buttons don't engage the camera far enough to activate the controls under them. Also When I sent my camera in it had a battery in it. I didn't get my batery back. Do I need a new RA# or should I return it on the original RA. Also need to expidite things as we have a photo contest comming up on
    sept 19 and I need to get the winning shot before then.

    Thanks
     
  4. reeldive

    reeldive Solo Diver

    # of Dives: 500 - 999
    Location: Wausau, FL
    258
    1
    Got hold of tech support today. They are sending new caps for the buttons that didn't work. He sugested that I shim the exsisting caps on the inside with a thin piece of cardboard in the mean time. Tried it. It appears to work. Now I need to dive it.

    Thanks Sea Life
     

Share This Page