Apeks XTX lever height

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Yeah I get the risk of no flow on the flow side of the tool, I guess it’s ok to keep the lever height above the tools range then.

I have Vance Harlow as well, just that I had decided on finishing the other book - “reg saavy” first before making my first attempt at reg repair. Intend to finish Vance’s book next.

I guess a pool test on a weekend will give me a little more confidence in my repair effort rather than overthinking everything while sitting in my armchair..
 
Yeah I get the risk of no flow on the flow side of the tool, I guess it’s ok to keep the lever height above the tools range then.

I have Vance Harlow as well, just that I had decided on finishing the other book - “reg saavy” first before making my first attempt at reg repair. Intend to finish Vance’s book next.

I guess a pool test on a weekend will give me a little more confidence in my repair effort rather than overthinking everything while sitting in my armchair..
It's fine for lever height to be above tool range.

If you can understand reg savvy, Vance Harlows book will be a walk in the park.

I hear you re overthinking, I used to obsess, now not so much.

Good luck with ya journey.
 
Back
Top Bottom