nereas
Contributor
- Messages
- 2,735
- Reaction score
- 9
- # of dives
- 500 - 999
So the more I look around different sites, and the more research I do into various subjects, the more I keep running into gear configurations talking about DIR and NAUI TEC configs. Was even able to find a site that talked about NAUI TEC configs and how hoses are routed and such. Basically, at least for me, not being able to physically look at the configs and see how things are routed, connected, etc, it all became very confusing very quickly.
Basically, I was looking at these different configurations to see about streamlining and standardizations. My normal dive buddy knows my config, and I know his (including the little quirk of his dive computer being on his right side) extremely well. I just hate having hoses hanging out and items drooping off of me when I'm diving, and kinda looking to streamline my profile some. I guess normally people don't start looking at things like this until they start thinking tech diving and such. Guess it's just this little bad habit I have of wanting to learn everything I can about things I do.
So, basically what I'm asking is multi-faceted. 1) What the heck is DIR? 2) Anyone got a simple (going to have to Barney Fife this one) description or link for the gear setups required for these? (Pictures help, as I'm more visually oriented than descriptive when it comes to learning).
Thanks ahead of time.
With your 0 - 24 dives, if that is true, then the main thing for you to do is decide when to move onto a BPW. Eventually most really good divers do, now, since BPs are now weight integrated with weight plates.
The normal progression is typically first from a rental jacket BC, to a back-inflation wing B/C, and ultimately to a BPW.
NAUI should have trained you not to have anything dangling from your gear, under the "C" for "clips" of the ABCD dive-prep mnemonic.
If you were trained by PADI then you probably still need to "Put Another Dollar In" (called "peak performance buoyancy") before they will clean you up so that you don't still look like a scorpion fish with gear dangling everywhere and dragging your console.
Don't get all worried about the "streamlining" debate, which is code for currents within caves. If you never dive a cave, then streamlining is unlikely to be a significant issue.
If you buy a DPV, then streamlining is nice, but again not critical to anything, unless you are racing against your buddies with their DPVs.
More important is that your gear be balanced, and that your trim be good, so that you hover horizontally in the water.
As important as your balance and trim, your weighting is also quite important. You should be wearing as little weight as you need for the conditions of your dive. Excess weight is a hazard.
When you take care of trim and balance and weighting, then streamlining will take care of itself naturally.
DIR has been hijacked by GUE to coin their own version of cave diving. This phrase has fallen out of favor except for an unpopular group who are ultra-conformist and anti-individualist in their methods.
"Hogarthian" is what most people call their configuration today, when they do not want to be sullied by "DIR."
Hogarthian means a BPW, a minimalistic configuration of your own choosing, nothing dangling, everything within easy reach, redundancy as necessary determined by the dive, horizontal trim, balance left and right, DIN, etc.
Aim for hogarthian. And then you will be a better diver.
NAUI Tech is for those who want to tackle caves or SCRs or deco. If you want to become a tech diver, that is where you would go.
Last edited: