Multi tool for save a dive + travel

[tursiops]

The Pandora V3 is amazingly useful, and fits in a small pouch on your waistband while diving. Titanium. I have the V2 in both stainless and titanium and covet the V3.

PANDORA-LAB

www.pandora-lab.com

 

[Wheeler925]

I wrote an article a few years ago with some suggestions for Multi-tools and other items. Check it out below.

The multi-tool I have in the kit is below. It cost $45 in 2021 now $85 in 2025!!!

Gerber MultiTool with Pliers (MP400)​

A good multi-tool provides the functionality of several different tools. The most useful function in this MultiTool is needle nose pilers. A basic needle nose plier may be cheaper, but you will need to add flat and phillips head screwdrivers.​

​

Info Thread 'Build your own Save a Dive Kit'

Oct 6, 2021

Build your own Save a Dive Kit*​

---

by Dave Hicks
From the Marker Buoy Dive Club October 2021 issue:

What’s that hissing noise??? Where are those bubbles coming from??? My dive computer is dead!!!

We’ve all experienced this situation on a dive excursion. You are all kitted up and ready to go and some piece of gear goes sideways. You have a loose hose on your 1st stage regulator blowing out air. The O-ring has failed or vanished from your tank. Your dry glove was attacked and holed by an urchin or barnacle. These issues can easily range from annoying to showstoppers.

It’s...

• davehicks
• Replies: 45
• Forum: ScubaBoard Articles

• 

Thats one hell of a kit.

 

[davehicks]

Thats one hell of a kit.

You can do it!

 

[JoeTPhilly]

 

[BoltSnap]

You can do it!

Have you ever thought about 3D printing an all-encompassing tool so we can buy it from you?

 

[tursiops]

View attachment 919835

I had a Tarantool and sold it. It was too big snd clunky to carry with me, and not as nice to use as actual wrenches.

 

[davehicks]

Have you ever thought about 3D printing an all-encompassing tool so we can buy it from you?

This sounds like obnoxious snark. Have I offended your delicate sensibilities so badly you felt a need to be an a-hole?

 

[BoltSnap]

This sounds like obnoxious snark. Have I offended your delicate sensibilities so badly you felt a need to be an a-hole?

???

Are you the one who prints a lot of tools in 3D? I don't understand why you're so upset. I was complimenting you, and I thought you might be able to 3D print some of the tools mentioned — we could then buy them from you.

I may come across as an ahole at times, but in this instance, I was genuinely complimenting you and believed you had the necessary skills. Perhaps I've mistaken you for someone else on SB.

I am truly sorry if I offended you in any way. I didn't mean to. Again, I thought I was complimenting you.

 

[JoeTPhilly]

I had a Tarantool and sold it. It was too big snd clunky to carry with me, and not as nice to use as actual wrenches.

I store it in the pocket of my wetnotes. Yes, a wrench is definitely better and I have a titanium one on a boltsnap which I carry in my right pocket. Here is a link:

Adjustable Wrench - Titanium 6 Inch ( NSN Pending )

Now In Limited Stock! New Small Batch Just In! Now hermetically sealed! Members of the U.S. military Explosive Ordinance Disposal teams keep asking for us to make light weight, non-magnetic wrenches for working on magnetically sensitive devices, and this is what we provide them: Specs...

countycomm.com

 

[davehicks]

???

Are you the one who prints a lot of tools in 3D? I don't understand why you're so upset. I was complimenting you, and I thought you might be able to 3D print some of the tools mentioned — we could then buy them from you.

I may come across as an ahole at times, but in this instance, I was genuinely complimenting you and believed you had the necessary skills. Perhaps I've mistaken you for someone else on SB.

I am truly sorry if I offended you in any way. I didn't mean to. Again, I thought I was complimenting you.

My mistake. I am sorry I took it for sarcasm.

Can I offer you a lovely 3d printed 2nd stage adjustment tool at a low, low price?