marc.collin
Contributor
hi
I bought a tuxing TXEDM043 (like the HPDAVV)
Seem build by
Shanghai Royal Machinery
www.alibaba.com
A clone of bauer
I done a air testing
filtertechs.com
Pass the test without issue.
Paid with delivery less than 2500 usd
Delivery took around 2 week
Get this connector to fill bottle... don't work fine because of the little pin on the din. This kind of connector seem used in europe.
A lot of discution to get the correct connector
Blue cover are plastic, probably in iron for bauer?
Another strange thing was electricity.
A standard 120v usa outlet provide 15Amp, some 20Amp.
I had 10 AWG wire size. With a break 20Amp sometime breaker fail when compressor start (not after). With a 25 Amp no issue).
Wire of the compressor is huge
Filter, don't know if a bauer could fit
Around 25 min to fill 80ft cylinder (with 200 psi).
I use it mostly anyway to fill ccr cylinder.
Used less then 2 hours, I use actually mineral oil who was provided with compressor.
I'm checking to maybe switch to synthetic oil. Do i would need to clean all the compressor to do it?
In canada i found
MOBIL RARUS 827
otherwise,
in mineral oil
Jordair J-EP65 Oil
any suggestion to get oil anywere in canada? (would prefer quebec province)
I use a manual carbon monoxyde meter.
I bought a tuxing TXEDM043 (like the HPDAVV)
Seem build by
Shanghai Royal Machinery

300bar 4500psi High Pressure Scuba Diving Air Compressor For Sale - Buy Diving Air Compressor,300bar Air Compressor,4500psi Air Compressor For Sale Product on Alibaba.com
300bar 4500psi High Pressure Scuba Diving Air Compressor For Sale - Buy Diving Air Compressor,300bar Air Compressor,4500psi Air Compressor For Sale Product on Alibaba.com
A clone of bauer
I done a air testing

Air Testing - Filtertechs
Using the Air Check Kit you can test your compressed air as needed. The process involves flowing air through an adaptor device to capture the sample. The test takes about 10 – 15 minutes to perform and fill in the paperwork. The sample is then shipped back to Trace Analytics…

Pass the test without issue.
Paid with delivery less than 2500 usd
Delivery took around 2 week
Get this connector to fill bottle... don't work fine because of the little pin on the din. This kind of connector seem used in europe.
A lot of discution to get the correct connector
Blue cover are plastic, probably in iron for bauer?
Another strange thing was electricity.
A standard 120v usa outlet provide 15Amp, some 20Amp.
I had 10 AWG wire size. With a break 20Amp sometime breaker fail when compressor start (not after). With a 25 Amp no issue).
Wire of the compressor is huge
Filter, don't know if a bauer could fit
Around 25 min to fill 80ft cylinder (with 200 psi).
I use it mostly anyway to fill ccr cylinder.
Used less then 2 hours, I use actually mineral oil who was provided with compressor.
I'm checking to maybe switch to synthetic oil. Do i would need to clean all the compressor to do it?
In canada i found
MOBIL RARUS 827
otherwise,
in mineral oil
Jordair J-EP65 Oil
any suggestion to get oil anywere in canada? (would prefer quebec province)
I use a manual carbon monoxyde meter.