Review tuxing compresor

[marc.collin]

hi

I bought a tuxing TXEDM043 (like the HPDAVV)


Seem build by

Shanghai Royal Machinery

300bar 4500psi High Pressure Scuba Diving Air Compressor For Sale - Buy Diving Air Compressor,300bar Air Compressor,4500psi Air Compressor For Sale Product on Alibaba.com

300bar 4500psi High Pressure Scuba Diving Air Compressor For Sale - Buy Diving Air Compressor,300bar Air Compressor,4500psi Air Compressor For Sale Product on Alibaba.com

www.alibaba.com

A clone of bauer

I done a air testing

Air Testing - Filtertechs

Using the Air Check Kit you can test your compressed air as needed. The process involves flowing air through an adaptor device to capture the sample. The test takes about 10 – 15 minutes to perform and fill in the paperwork. The sample is then shipped back to Trace Analytics…

filtertechs.com

Pass the test without issue.

Paid with delivery less than 2500 usd
Delivery took around 2 week

Get this connector to fill bottle... don't work fine because of the little pin on the din. This kind of connector seem used in europe.
A lot of discution to get the correct connector

Blue cover are plastic, probably in iron for bauer?

Another strange thing was electricity.

A standard 120v usa outlet provide 15Amp, some 20Amp.

I had 10 AWG wire size. With a break 20Amp sometime breaker fail when compressor start (not after). With a 25 Amp no issue).
Wire of the compressor is huge

Filter, don't know if a bauer could fit

Around 25 min to fill 80ft cylinder (with 200 psi).
I use it mostly anyway to fill ccr cylinder.

Used less then 2 hours, I use actually mineral oil who was provided with compressor.

I'm checking to maybe switch to synthetic oil. Do i would need to clean all the compressor to do it?

In canada i found
MOBIL RARUS 827

otherwise,

in mineral oil
Jordair J-EP65 Oil

any suggestion to get oil anywere in canada? (would prefer quebec province)

I use a manual carbon monoxyde meter.

 

[Gone for diving]

How do you like this unit?

3 hp is a lot to pull from a 120v plug.
I run my uttlis on 220v with a vfd, 3 HP

 

[grantmac]

Did you try starting it with the bleeds open?

If the quality is decent and it can use Bauer parts that would be a really nice home machine.

 

[marc.collin]

i like it,
less then 10 hours

surely i could change a part to switch to 220

not tried to starting bleed open

 

[rhwestfall]

Looks just like a (my) Bauer....

Curious the future. Looks interesting.

 

[happy-diver]

Inside bauer

and you would buy a second compressor for spares before you forked out for anything bauer

but this one parts here the seat you need every couple of years from wherever you can get it


the company that built the compressor

 

[emoreira]

A plain copy of a Bauer Junior II.