Why choose LP tanks over HP Steel tanks?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

@Bob DBF

Bob

Thank you for the vote of confidence --
Yes I was around before it all began.. It began with 1800 PSI tanks
I will be away for several days and will respond in full detail when I return

Cheers from a hill over looking the blue Pacific in lovely sunny CenCal

Sam
 
You accept your AL80s with short fills. An AL80 with a 200 bar fill is 75cf.
If an Al80 is 75cf at 200 bar, it's 77.5cf at 3000 psi. The difference is 3%, 5 minutes gas time at the surface or less than 2 minutes gas time at 20m/65ft (assuming 0.5cf/min RMV)

You're joking, right?
 
If an Al80 is 75cf at 200 bar, it's 77.5cf at 3000 psi. The difference is 3%, 5 minutes gas time at the surface or less than 2 minutes gas time at 20m/65ft (assuming 0.5cf/min RMV)

You're joking, right?
Did you read what I was responding to?
 

Back
Top Bottom