ZzzKing
Contributor
Rooster:But here is wat I use currently:
Reg: Scuba Pro MK20/G-500 W/R190 octo
BC: Scuba Pro Classic
Fins: Scuba Pro Jet Fins
Console: USD Pivot with Matrix Computer
Mask: Tusa Liberator Plus
Wet Suit: Body Glove 2mil Shorty
Tanks: 6 Alum 80s, 8 Alum 67s, 2 Alum 63s, 1 Alum 92, 1 Alum 33 Pony, 1 Alum 13 Pony
UW Video: Sony TR86 in a Sony MPK TRA housing
Cameras: Nikon F-100 housed in an Aquatica A-100 housing, double nikon TTL bulkheads, Maco port, Macro port extension for 105mm lens. Strobes: Nikon SB 105, and an Ikelite SS100a, both strobes on TLC arms Lenses: 60mm Micro Nikor, and 105mm Micro Nikor.
Nikonos V with SB-105 strobe, 35 mm lens, 15mm lens, Nikonos Close up kit, Iklite Extension tube set.
Sea & Sea MMII EX with YS 50, 15mm lens, & 3T Macro lens.
That's a LOT of gear to be totin' around. 19 cylinders should give you plenty of bottom time but I'm not sure how you can carry all those and four cameras at the same time.
My setup:
BC: Cheap*ss Aluminum plate w/ single piece harness and 30# Mach V wing.
Reg: Atomic Z2
Computer: Dive Rite Nitek Plus
Exposure Protection: 7mm Pinnacle wetsuit, cheap*ss boots
Mask: A Tilos somethingorother that fits my face and doesn't leak
Fins: SP Jets
Tank: Typically a single Al80. Sometimes a 30 cuft pony also.