tray and arms for Fantasea FA6500

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Sagi

Registered
Messages
48
Reaction score
2
Location
Israel
# of dives
100 - 199
hey all :)
so this is my current setup- Fantasea FA6500 housing, Ikelite double handle tray, Inon D2000S and an arm I got with it.

20210517_161918.jpg


there are 2 problems with this setup:
1. the tray doesn't fit the housing well, only 2 out of 3 screws align well (center and one of the sides).
2. the tray ball is not the same size as the arm ball and as result the clamp can't hold it in place and the strobe just keep falling off during the dive.

Does anyone has a good recommendation for a set (double handle tray, long arm + short arm and 3 clamps) which will work with the housing and strobe?
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom