stretchthepenn
Contributor
I made my own adjustable bungee strap with 38" of bungee and four zipties. Here's how it works:
1. Cut the length of bungee and singe the ends.
2. Make a U with the bungee.
3. Drape the U over the 2nd stage regulator's stem (the spot where the main body meets the mouthpiece).
** It should look like a long mustache.
4. Wrap each end of the bungee underneath the regulator's stem and up again.
** You will have one piece of bungee over the stem, two pieces underneath the stem, and two long pieces pointing up.)
5 Ziptie the bungee pairs on each side of the regulator's stem.
6. Adjust the bungee until it is snug around the regulator's stem and both free pieces are about the same length.
7. Tie a sizeable knot in each end of the bungee.
8. Overlap the long pieces and match each knot to the opposite piece of bungee.
** You will have a large loop that will go around your neck.
9. Ziptie the bungee pairs, with one ziptie underneath each knot.
10. Trim the ziptie ends cleanly, making sure to remove all sharp edges.
And you're done. You now have an adjustable bungee necklace that's cheap, easy to make/repair, and easy to remove.
1. Cut the length of bungee and singe the ends.
2. Make a U with the bungee.
3. Drape the U over the 2nd stage regulator's stem (the spot where the main body meets the mouthpiece).
** It should look like a long mustache.
4. Wrap each end of the bungee underneath the regulator's stem and up again.
** You will have one piece of bungee over the stem, two pieces underneath the stem, and two long pieces pointing up.)
5 Ziptie the bungee pairs on each side of the regulator's stem.
6. Adjust the bungee until it is snug around the regulator's stem and both free pieces are about the same length.
7. Tie a sizeable knot in each end of the bungee.
8. Overlap the long pieces and match each knot to the opposite piece of bungee.
** You will have a large loop that will go around your neck.
9. Ziptie the bungee pairs, with one ziptie underneath each knot.
10. Trim the ziptie ends cleanly, making sure to remove all sharp edges.
And you're done. You now have an adjustable bungee necklace that's cheap, easy to make/repair, and easy to remove.