Scubapro A-clamp

[Mr.X]

Would any of you know where to a get a Scubapro brand or universal A-clamp for a Scubapro Din-style regulator ? USA preferably.

Thanks in advance.

X

 

[Couv]

Hello Mr. X,

It might be helpful to list the model regulator you intend to mount it on. For instance, a MK V and MK X do not share the same size yoke adapter.

couv

 

[Mr.X]

Hello Mr. X,

It might be helpful to list the model regulator you intend to mount it on. For instance, a MK V and MK X do not share the same size yoke adapter.

couv

Thanks Couv. Looking for MK 25 Din to A clamp adaptor.

Cheers,

X

 

[redacted]

Much to my surprise, I find I have a number of scubapro yokes in my stash. To be clear, you are talking about removing the din connector and replacing it with the yoke connector. I always get confused by adapter vs converter. I'm headed out of town for a week tomorrow but if you have not found what you need in that time drop me a PM and I'm sure I can fix you up. It would say Mk20 on the screw rather than Mk25 but it wouldl include the yoke nut upgrade. I'll be back on 4 Sept.

 

[Couv]

Mr. X, just a couple more points to clarify:

Is your regulator DIN?
Do you want to convert it or just get an adapter?

Here are a couple of threads that may be helpful.

http://www.scubaboard.com/forums/regulators/223649-mk17-mk25-convert-din.html

http://www.scubaboard.com/forums/regulators/220223-din-adaptors.html

http://www.scubaboard.com/forums/regulators/214357-yoke-din-converter-just-good-din-out-box.html

 

[Packhorse]

If you want to convert your MK25 to yoke I have a couple. Glad to swao for a DIN kit.

On the other hand if you want an adaptor any brand should work.

 

[Mr.X]

Thanks Couv, Awap and Packhorse! I'll be perusing the information you've all provided. I appreciate it. It's those time when I travel and find clamp-style tanks. In short, it's a converter...meaning I'll screw on a clamp-style yoke onto a DIN fitting to mate the reg. onto a non-din valve.

I've been so out of clamp style fittings that I've forgotten that I might have a Poseidon clamp around. I'll have to experiment.

Cheers and again, thanks.

X

 

[Scubakevdm]

Thanks Couv, Awap and Packhorse! I'll be perusing the information you've all provided. I appreciate it. It's those time when I travel and find clamp-style tanks. In short, it's a converter...meaning I'll screw on a clamp-style yoke onto a DIN fitting to mate the reg. onto a non-din valve.

I've been so out of clamp style fittings that I've forgotten that I might have a Poseidon clamp around. I'll have to experiment.

Cheers and again, thanks.

X

DIN to yoke adapters are universal fit. ScubaPro makes a fairly meaty one, but there are generic, less robust ones to be had from various sources for less money. Coltri Sub has some of these. If you run into a bind, shoot me a PM and I'll see if I can round one up for you.