Scuba Pro MkV rebuild kit needed.

[C_C]

I just got my mitts on an OLD SP MkV that has the light yoke connection and a rotating two-port end--instead of the 5 port of the newer models.

Anyone know where I can get a rebuild kit? I will not be using this regulator for diving, but will use to attach blow guns, tire pump connectors, etc.

Thanks,

C_C

 

[devjr]

You should be able to take care of things with a few O rings and a HP seat. I believe it is possible to invert the seat on the MK5 and use the good side.

The MK5 first stage does not have a pressure relief valve. Should the regulator leak, the pressure in the attached hose will rise and possibly blow the hose or fittings. This can be rather powerful if the reg is attached to a SCUBA tank.

Overpressure valves are available to fit SCUBA 3/8 threads. One of the teckies could probably advise. Rebuild kits show up on E Bay from time to time. The dealer part # is 10-105-041