Revo Nerd 2 Mount Extension

[mehfridge]

I ran into some issues with wanting to move where my Nerd 2 was positioned relative to my eye, while still using the adjustable Revo mount. I created a 3d model of the original part then created 2 different sized extensions that add 10mm or 20mm to the original part.

It does require a bit of work as there's a hole that needs to be drilled and tapped. It also requires a couple pieces of custom hardware but nothing too expensive.

Also, it may function with other Nerd 2 mounts, but the one pictured is the only one I had to test with.

I've attached the step files if you want to try 3d printing it yourself, or you can order one through shapeways.

Nerd2 Revo mount extension by Mehfridge on Shapeways

Check out Nerd2 Revo mount extension by Mehfridge on Shapeways and discover more 3D printed products in Other.

www.shapeways.com

Required hardware and tools:
M4-0.7 x 20mm Socket Head Cap screw (Stainless Steel)
M4-0.7 x 40mm Socket Head Cap screw (Stainless Steel) (Only for Medium/10mm extension)
M4-0.7 x 50mm Socket Head Cap screw (Stainless Steel) (Only for Large/20mm extension)
M4-0.7 Nylon Lock Nut (Stainless Steel)
M4-0.7 Bottoming Tap
3.30mm Drill bit

 

[Divermikey]

I ran into some issues with wanting to move where my Nerd 2 was positioned relative to my eye, while still using the adjustable Revo mount. I created a 3d model of the original part then created 2 different sized extensions that add 10mm or 20mm to the original part.

It does require a bit of work as there's a hole that needs to be drilled and tapped. It also requires a couple pieces of custom hardware but nothing too expensive.

Also, it may function with other Nerd 2 mounts, but the one pictured is the only one I had to test with.

I've attached the step files if you want to try 3d printing it yourself, or you can order one through shapeways.

Nerd2 Revo mount extension by Mehfridge on Shapeways

Check out Nerd2 Revo mount extension by Mehfridge on Shapeways and discover more 3D printed products in Other.

www.shapeways.com

Required hardware and tools:
M4-0.7 x 20mm Socket Head Cap screw (Stainless Steel)
M4-0.7 x 40mm Socket Head Cap screw (Stainless Steel) (Only for Medium/10mm extension)
M4-0.7 x 50mm Socket Head Cap screw (Stainless Steel) (Only for Large/20mm extension)
M4-0.7 Nylon Lock Nut (Stainless Steel)
M4-0.7 Bottoming Tap
3.30mm Drill bit

If I understand this correctly the 20mm piece would kick the Nerd over approx 3/4"

 

[mehfridge]

If I understand this correctly the 20mm piece would kick the Nerd over approx 3/4"

Correct, the 20mm piece will move it just over 3/4" from where the original part would place it.

 

[Divermikey]

Correct, the 20mm piece will move it just over 3/4" from where the original part would place it.

thanks, I ordered the 20mm part from Shapeways, looking forward to trying it out in may.
I do like the nerd at the far edge of my vision of my left eye.

 

[mehfridge]

thanks, I ordered the 20mm part from Shapeways, looking forward to trying it out in may.
I do like the nerd at the far edge of my vision of my left eye.

I hope it works out for you! I definitely prefer the new position, although the nerd is on my right side. Oh one other note, the nut is a tight fit in the new part but it does fit. If you really struggle though you could probably use a bit of high grit sandpaper to make more room for an easier fit. Feel free to reach out if you have any issues and I'll do whatever I can to help.

 

[Divermikey]

I've been using a "homemade bracket" to kick the Nerd as far left as possible, so I know thats where I want the Nerd to live. Thanks for coming with and making the bracket extension. Much appreciated.

 

[mehfridge]

I've been using a "homemade bracket" to kick the Nerd as far left as possible, so I know thats where I want the Nerd to live. Thanks for coming with and making the bracket extension. Much appreciated.

No problem at all, glad to help!

 

[Divermikey]

No problem at all, glad to help!

I received my 3D printed part today. Drilled and tapped and installed. Can't wait to try it out in May. Thank you for everything!