Frogman82
Contributor
After adjusting the IP on full tank pressure, can the cracking pressure be fine tuned on a partially used tank?
Poseidon xtream set up
- Thread starter Frogman82
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
- Messages
- 20,630
- Reaction score
- 15,084
- # of dives
- I'm a Fish!
the first stages are not perfectly balanced and since the second stage is an upstream valve you want to tune it at the lowest IP it will experience which needs to be with a full tank. If you fine tune it at anything less than a full tank it will leak when you put it on a full tank. The MK3's are better balanced than the older designs but still aren't perfect.
OP
Frogman82
Contributor
Thanks @tbone1004!
Similar threads
