Spg01
Contributor
Does anybody have ideas on where to get a rebuild kit for a 3500 psi Ocean Dynamics valve?
ocean dynamics 3500 psi valve rebuild kit
- Thread starter Spg01
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
BertStevens
Contributor
I realize this is an old thread. It came up on a Google search.
Did you ever find a rebuild kit? And if so, where?
Did you ever find a rebuild kit? And if so, where?
OP
Spg01
Contributor
Nope. But Dive Gear Express sells some rebuild kits you might be able to use.
Scuba Valve Service Parts and Tools | Dive Gear Express®
Scuba Valve Service Parts and Tools | Dive Gear Express®
DEdiveguy1
Registered
Ocean Dynamics valves utilize standard valve parts - very similar to old-style Sherwood assembly from my memory. The PRD is of the 3/8" variety. Most people can disassemble and rebuild a valve. The internals of valves are pretty simplistic; however, the ability to buy valve repair parts and find diagrams online does not qualify someone to service valves. Improper assembly and service of valves can lead to serious injury or death. If you're not certain what you're doing, best bet would be to find a LDS with a trained technician. Always remember the owner (not the fill-station operator, the dive center, or the hydrostatic requalifier) is responsible for the cylinder and valve condition, and any injury or death resulting from the failure of either.
Similar threads
