I am now proud owner of an MCH-6 compressor (it will need 2 month till I have it finally in my hands).
I just read the guide and a few points are raising questions:
1. (1.10.1, page 18): After the first 5 hours or running:
Tightening the torque values
The table shows tightening torques for bolts or hexagonal-head screws........
Question: Do I need to buy the tool to tightening them to the exact torques??
2. Filling a tank: Don't I need to get the non filtered air out of the hose first?
3. Change Oil: every 50 hours. I read somewhere else that it should be every 25 hours???
4. Filter replacement:
Example: 30 Degree C (86 F) Filter duration 20 hours.
N bottles 15 liter 200 bar if the compressor runs at 80l/min 32, if runs at 100 l/min: 40.
that sounds strange! Mine is running at 80 l/min. In my opinion it must be the same amount of air no matter how fast it runs. So the time must be longer with 80 l/min than with 100 l/min
5. Connection: 220 Volt 50 Hz+Earth: here there is no earth connection. All the house doesn't has them. there is no garden I can ram in a rod and even the water pipes are pvc so I can't abuse them. That shouldn't be a problem unless I touch it when it is pluged in, or?
6. What's the best oil to get for it? The guide mentioned that everytime you change the oil, the oil filter must be changed as well. In my understanding that compressor doesn't has an oil filter, or?
I just read the guide and a few points are raising questions:
1. (1.10.1, page 18): After the first 5 hours or running:
Tightening the torque values
The table shows tightening torques for bolts or hexagonal-head screws........
Question: Do I need to buy the tool to tightening them to the exact torques??
2. Filling a tank: Don't I need to get the non filtered air out of the hose first?
3. Change Oil: every 50 hours. I read somewhere else that it should be every 25 hours???
4. Filter replacement:
Example: 30 Degree C (86 F) Filter duration 20 hours.
N bottles 15 liter 200 bar if the compressor runs at 80l/min 32, if runs at 100 l/min: 40.
that sounds strange! Mine is running at 80 l/min. In my opinion it must be the same amount of air no matter how fast it runs. So the time must be longer with 80 l/min than with 100 l/min
5. Connection: 220 Volt 50 Hz+Earth: here there is no earth connection. All the house doesn't has them. there is no garden I can ram in a rod and even the water pipes are pvc so I can't abuse them. That shouldn't be a problem unless I touch it when it is pluged in, or?
6. What's the best oil to get for it? The guide mentioned that everytime you change the oil, the oil filter must be changed as well. In my understanding that compressor doesn't has an oil filter, or?