Looking for knowledgeable opinion on water getting into regs

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I assume the Hollis 2nd stage is very similar to Apeks.
If the seat is worn then you should have free flow when pressurized. The venturi is just a plastic flap which has no effect on anything on its own.
As already suggested(#6), pressurized it and check for leak.

Good luck.
 
Last edited:
Yah, venturi will have absolutely no effect.
Yank that hose, plug the port, and try a soak of the 1st stage. Problem goes away > it's that stage.
But, I'd pressure test it first to test everything for leaks.

If you are getting water all the way back to the HP hose from soaking, that's quite a leak unless your dunk tank is feet deep and you are soaking for hours.
 

Back
Top Bottom