Dive gear express

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

ripman3

Contributor
Messages
165
Reaction score
34
Location
New York City
# of dives
I'm a Fish!
Has anyone used the DGX PREMIUM DUAL OUTLET MANIFOLD? How did you like it? I was thinking of putting it on faber hp 100s please let me know if it is any good or not. Thanks
 
I have the DGX modular valves and one of the H adapters but not the crossbar. They are indistinguishable from the Dive Rite modular valves except that they don't say Dive Rite on them. All parts interchange. I would expect the same of the crossbar.

I'm very pleased with them and will buy more. There are a couple of very minor things to be aware of.

1) DGX does not include the yoke conversion "slugs" in the price.
2) You get a 3 piece burst disc which, confusingly, is marked on the plug with a blow pressure of 5250. (Usually only 1-piece assemblies are marked, because of the possibility of the copper disc being assembled with the wrong plug)
3) I had to change a burst disc to a low pressure one and found it quite difficult to get out of the valve.
4) There is no good place to put a wrench on these valves if a situation should arise where they have to be removed from the cylinder with force. There are special tools that thread into the DIN opening that you can purchase from scuba tools places.
5) The profile is relatively short, which I find to be a good thing.
 
Yup, copy of diverite......A very good manifold.
 
Thanks for your quick replies. i think i am gonna pick one up.
 
I have bought about ten sets in the last few years, top quality manifold.
 
I bought a set of doubles with their manifold. No problems yet after a year plus.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom