Hello all, I am still working on my reg list for tec diving (never ending), i finalized and bought my main and deco regs/list. and now on stage 2 im looking to buy twinset tanks (steel tall 12L x 2, 300 Bars) and a manifold.
i was orginally concedring the apeks manifold, then got across the NAUTEC APEX Tec-Valve Trim DarkLine / M25 / Air 300 bar. frank honslty i liked the engineer/owner interview, descriptions and eventhoug not important at all but guilty of being impressed by its concept and looks specially the black onse.
desciprions: i liked in theory the micro filter, and the HP-Port below the manifold for a transmitter in my case, but i couldnt find any reviews or detailed descriptions or videos, only found very little compliments of it being highend and top quality. not enough to make a decision.
Manifold HP-Port: my understanding is it will reduce a filure point as when it fails just closing the manifold alone will split the 2 tanks and close the failure point, and breathe from the main tank, then continue from the necklace. hence, will elemenate a failure point from one of the 1st stages and mitigate it to the manifold with a one-step (manifold closing) procedure in case of failure. It could be just my wild imagination, as i couldnt find anything online.
im open for any discussions, and if anyone knows any information, know someone who used them, or even have herd about them, please share any infromtion or feedback. thanks
i was orginally concedring the apeks manifold, then got across the NAUTEC APEX Tec-Valve Trim DarkLine / M25 / Air 300 bar. frank honslty i liked the engineer/owner interview, descriptions and eventhoug not important at all but guilty of being impressed by its concept and looks specially the black onse.
desciprions: i liked in theory the micro filter, and the HP-Port below the manifold for a transmitter in my case, but i couldnt find any reviews or detailed descriptions or videos, only found very little compliments of it being highend and top quality. not enough to make a decision.
Manifold HP-Port: my understanding is it will reduce a filure point as when it fails just closing the manifold alone will split the 2 tanks and close the failure point, and breathe from the main tank, then continue from the necklace. hence, will elemenate a failure point from one of the 1st stages and mitigate it to the manifold with a one-step (manifold closing) procedure in case of failure. It could be just my wild imagination, as i couldnt find anything online.
im open for any discussions, and if anyone knows any information, know someone who used them, or even have herd about them, please share any infromtion or feedback. thanks