Damn cheap crap

[I_R_DIVER]

Has any one heard of a reg called Sub Marex, I got one in to service and it is absolute hell. I swear It is made of freaking peanut brittle. First I open the DV and then the thing breaks in halve! not stripped not hurt it cracks open like a freaking egg man. AAAGHH luckily I saw for some odd reason one lying at my buddies shop. Some one got it for free and said he must put it on his reg as an octo but my buddy said he would not touch it with a barge pole so he sold the dude a different reg and so I swiped it. Anyway that is not the problem it has a similar design to a SP MK10 where the hp seat sits in the little well with the little hole in the bottom now my problem is it is leaking out that little hole what the hell must I do PLEASE HELP ME has any one with a MK 10 Scuba Pro ever had this problem

 

[Randy43068]

Chuck it and get something good.

Why fool around with this junk?

 

[Couv]

Has any one heard of a reg called Sub Marex, I got one in to service and it is absolute hell....snip.. it has a similar design to a SP MK10 where the hp seat sits in the little well with the little hole in the bottom now my problem is it is leaking out that little hole what the hell must I do PLEASE HELP ME has any one with a MK 10 Scuba Pro ever had this problem

Hello I R,

I am not familiar with Sub Marex, but for a MK 10 there is a seal for the HP seat that is in the body of the 1st stage. Remove the HP cap and look down into the 1st stage body. There should be an o-ring (-013) that mates up to the hp seat when the hp cap and seat are installed. Instead of an o-ring, there might be a thick plastic washer, usually orange in color.

Additionally, make sure that the cap is installed all the way and that you have the correct hp seat.

Hope this helps, keep us posted,

couv