custureri
Registered
For the XDEEP NX Series Plates - I weighed them all. I personally dive the NX Stainless in everything but a 3mm (im neutral with zero additional weight in a 3mm. Even with an AL80, I am overweight. However, once the 5mm goes on, im perfectly balanced. I use the AL for 3mm or less.
actual weights from my calibrated scale.
Regular Stainless - 4.2kg (9.25lbs)
Regular Aluminum - 1.85kg (4.1 lbs)
Large Stainless - 4.4kg (9.8 lbs)
Large Aluminum - 2kg (4.4lbs)
For Aluminum 80's - with Valve in Salt they are +3lbs buoyant for Luxfers. FABER LP85's - with regs almost neutral (slightly positive). HP100's = - 3 or so with single reg. With Regulator (depends on weight of reg) subtract +/- 1.5 or so. You can find all exact cylinder information on each Manufacturer's website.
actual weights from my calibrated scale.
Regular Stainless - 4.2kg (9.25lbs)
Regular Aluminum - 1.85kg (4.1 lbs)
Large Stainless - 4.4kg (9.8 lbs)
Large Aluminum - 2kg (4.4lbs)
For Aluminum 80's - with Valve in Salt they are +3lbs buoyant for Luxfers. FABER LP85's - with regs almost neutral (slightly positive). HP100's = - 3 or so with single reg. With Regulator (depends on weight of reg) subtract +/- 1.5 or so. You can find all exact cylinder information on each Manufacturer's website.