OP
mmcdanie
Contributor
VDH does not have one on the site. (3/8 female to 7/16 male HP adapter). I'll call them today and see if they can be of some help.
Aqualung - Calypso Regulator rebuild suggestions
- Thread starter mmcdanie
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Don't you need to opposite???? A male 3/8 (into the reg) with a female 7/16 (to screw the hose into) adpater?? Another option and the one I prefer is to just get a 3/8 HP hose. Trident has them and any Trident dealer can order them...VDH is a Trident dealer. That is what I use but I also carry ad adapter just in case I need a hose quick...save my rear on Bonaire last year.
OP
mmcdanie
Contributor
The HP hose I got is 3/8 male (into the calypso 1stage) and standard 7/16 female for a standard SPG. The sea-div SPG is a 3/8. VDH was not much help but did suggest I look at the Trident catalog again, which I'm going to do. They said it is not a rare request.
scallop
Contributor
I just came into one of what appears to be a first gen Calypso. Has some corrosion ect. looks like it has been sitting a long time. Any value to it as far as resale? Or should I clean it up cosmetically and use as a display piece? Also have a plastic backplate and harness us a USD KAM "EZ" PAK
Similar threads
